Use "lanconf64e.efi" to measure the X710 10G Fiber signal (TX/RX), but something goes error

[DavidCFWei]

Excuse me, I want to measure the X710-BM2 (IC) 10G Fiber signal (TX/RX) and use "lanconf64e.efi" tool to set the settings But there will be many situations:

Tx: Only 10G_PRBS31 can be used for measurement. If you switch to other options (PRBS9/PRBS31/Square

Tx:
Only 10G_PRBS31 can be used for measurement. If you switch to other options (PRBS9/PRBS31/Square 8), the signal will disappear immediately.
Measuring DUT requires PRBS9 & Square 8 for measurement.
RX:
Unable to find suitable instructions for measurement (EX: DUT Loopback or read PRBS BER)
You can only see the BASE-T option in IEEE BER Test
Use BERT (test instrument) to drive the PRBS signal into the RX of the chip through the test fixture

And
We also encountered the same situation when measuring E810-XXVAM2 25G Fiber.

Any suggestions or a better testing tool?

[Simon-Intel]

Hi DavidCFWei,

Thank you for reaching out to the Intel community. We acknowledge receipt of your concern and want to assure you that assisting you is our top priority. To effectively troubleshoot the issue you're facing, we require some additional information from your end.

Could you kindly provide the following details?

1. System Model:

2. Purpose of measuring the fiber signal:

Your prompt response with this information will greatly assist us in diagnosing and resolving the issue as quickly as possible.

We look forward to hearing from you soon.

Best Regards,

Simon

[DavidCFWei]

Hi , Simon

1.System Model:

        CPU : Intel CPU (FHF)

       OS : Win 11

       Lan Controller : X710-BM2 (10G) , E810-XXVAM2 (25G)

2.Purpose of measuring the fiber signal:

When making a small board using these two ICs, it is necessary to measure the signal quality on the small board.

Please check this .

Any questions , please let me know .

Thank you

[Sachinks]

Hello DavidCFWei,

Thank you for the details.

Since you are using a custom board and you wish to measure the fiber signals for X710 10G card, we suggest posting this query in our embedded community forum.

Kindly use the below link and submit your request.

https://community.intel.com/t5/Embedded-Connectivity/bd-p/embedded-networking-connectivity

Thank you for using Intel products and services.

Regards,

Sachin KS

[CarlosAM_INTEL]

Hello,  @Sachinks:

Thank you for contacting Intel Embedded Community.

We need to clarify that this forum is not related to an Embedded Platform.

Due to this, the customer request is out of our scope of support.

Please consider this information when you provide the previous suggestion, or transfer any forums to the channel that you mentioned in your previous communication.

Best regards,

@CarlosAM_INTEL.

[Simon-Intel]

Hello DavidCFWei,

Good Day!

I'm reaching out regarding your concern that requires the attention of the FPGA team. Please get in touch with them for further support. Here's the link to connect with them: FPGA Team Community

Best Regards,

Simon

[Simon-Intel]

Hi DavidCFWei,

Thank you for contacting Intel.

This is the first follow-up regarding the issue you reported to us.

We wanted to inquire whether you had the opportunity to review the plan of action (POA) we provided. 

Feel free to reply to this message, and we'll be more than happy to assist you further.

Regards,

Simon