VHDL code to read the MAX10 ADC

[TahirMahmood]

I want to write VHDL code to read the MAX10 ADC. Do you have an example code for Max10 evalaution kit

[AqidAyman_Intel]

We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.

Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.

We appreciate your patience and understanding, and we are committed to providing you with the best support possible.

Thank you for your understanding.

[AqidAyman_Intel]

Hi,

You can refer to some old example designs as follows:

• https://www.intel.com/content/www/us/en/design-example/714441/intel-max-10-fpga-adc-example-for-use-with-the-board-test-system-monitor-panel-design-example.html?wapkw=max%2010%20adc

• https://www.intel.com/content/www/us/en/design-example/714716/intel-max-10-fpga-gpio-qspi-flash-uart-adc-leds-and-switches-design-example.html?wapkw=max%2010%20adc

Regards,

Aqid

[AqidAyman_Intel]

I hope the previous response was sufficient to help you proceed. As we do not receive any response from you on the previous question/reply/answer that we have provided. Please login to ‘https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.