- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Im looking for the schematics for evb-ec2630qi (http://www.mouser.com/productdetail/enpirion/evb-ec2630qi/?qs=sgaepimzzmvcrsgomffep6905dcuu8ltd0wpwrrqg3u%3d) (Eval kit for the EC2630QI). I am hoping that there is footprint recommendation for this part too. It seems like EN5311QI, EN6347QI and EN23F2QI all have footprint recommendations and even a sample schematic but the EC2630QI doesn't. For instance the M/S only says" Master/Slave pin for clock synchronization. Logic low = Master.Logic high = Slave" in the description but it fails to provide the definition of Logic High and Low. Even the simplified circuit on Page 1 doesnt show the M/S connection. Please assist.
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If you check out the data sheet here (https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/ds/ec2630qi_05996.pdf) , and look on page 12, you should see the recommended footprint.
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page