Intel® ARC™ Graphics
Get answers to your questions or issues when gaming on the world’s best discrete video cards with the latest news surrounding Intel® ARC™ Graphics
1729 Discussions

Virtual Camera from Arc Control only 720p

RaysinToast
Beginner
1,103 Views

Hi

 

I just installed an Arc A310 on my system and running Arc Control (updated to latest)

 

In Studio, I have virtual camera on and set to 1080p and the source is a 1080p camera

 

However in OBS when I add the Intel Virtual Camera - it only lists 1280x720 30fps

 

is there a setting i'm missing? I've gone into the broadcast and capture settings and set them to 1080p as well but that didnt do anything

 

ReBAR is enabled.

0 Kudos
12 Replies
RamyerM_Intel
Moderator
958 Views

Hello RaysinToast, 


Thank you for posting in the communities. I would like to apologize for the delay in my response. Let me make it up to you. When you mention OBS, are you using a 3rd party software aside from the intel arc control? I just want to make sure we are on the same page. Additionally, may I please know if you are using a laptop or a customer build desktop system? You may send us the SSU logs so we can be more familiar with your specification. If you are using a customer build desktop, may I please know the camera model that model that you are using? I will be waiting for your reply. 


Ramyer M. 

Intel Customer Support technician 


0 Kudos
RaysinToast
Beginner
899 Views

Hi

 

no other software - just Intel Arc and OBS

this is a customer built desktop PC, the board is Asus Prime x670E-Pro with Ryzen 7950x.

The Camera is a Sony ZV-E10 (current video mode set to 1080p)

0 Kudos
RamyerM_Intel
Moderator
890 Views

Hello RaysinToast,

 

Thank you for confirming. So far in the logs, I can confirm you are using the latest. Kindly please follow this article to use the Virtual Camera in Intel Arc Control: How Do I Use the Virtual Camera in Intel® Arc Control for Streaming or Content Creation? If you have followed this step already , please provide a screenshot of the view that you are using. Additionally, please share the version of your Intel Arc Control so we can take a further look at this for you.

 

Ramyer M.
Intel Customer Support Technician

0 Kudos
RaysinToast
Beginner
863 Views

I have already tried those steps as they are the only way to get the device to show in OBS

 

RaysinToast_0-1713535136516.png

here you can see the version, below

RaysinToast_1-1713535217533.png

 

 

Here is the device without Intel Arc's virtual camera and going straight to OBS as a source - allowing to go 1920x1080

RaysinToast_2-1713535337653.png

 

0 Kudos
RamyerM_Intel
Moderator
780 Views

Hello RaysinToast, 


Thank you for letting us know about the steps that you have already taken. I will proceed in coordinating this with our team so we can investigate this further. I will make sure to get back on this thread as soon as possible. 


Ramyer M. 

Intel Customer Support Technician 


0 Kudos
RamyerM_Intel
Moderator
591 Views

Hello RaysinToast, 


Thank you for patiently waiting. We have here some steps that we would like for you to try, kindly please update your driver version to Intel® Graphics Driver 31.0.101.5445 (WHQL Certified). If the issue still exists, kindly please share with us the ArcControl logs found at C:\Users\<your_username_here>\AppData|Local\Intel\IGN\logs. I will be waiting for your reply. 


Ramyer M. 

Intel Customer Support Technician 


0 Kudos
RaysinToast
Beginner
562 Views

Updated to the driver you mentioned after DDU driver cleanup but still same issue, only showing as 1280x720 via Intel Virtual Camera

 

Logs attached as requested

0 Kudos
RamyerM_Intel
Moderator
498 Views

Hello RaysinToast, 


I am sorry to hear about this result. We will proceed in checking this logs internally and get back to you on this thread as soon as possible. Thank you for your patience and cooperation. 


Ramyer M. 

Intel Customer Support technician 



0 Kudos
RamyerM_Intel
Moderator
324 Views

Hello RaysinToast,


Thank you for your patience as we continue our investigation. To assist us further, we would like to clarify a few details. May we please know the source from which you have obtained OBS Studio? The reason we ask is because it is available through various channels such as Steam, the Microsoft Store, and directly from the OBS website. Additionally, could you please inform us of the specific version of OBS Studio you are currently utilizing?

I will be waiting for your reply.


Ramyer M. 

Intel Customer Support Technician 


0 Kudos
RaysinToast
Beginner
276 Views
I used the version directly from their site OBSproject.com version 30.1.2
0 Kudos
RamyerM_Intel
Moderator
250 Views

Hello RaysinToast,


Thank you for confirming this details. We will continue on investigating this internally and I promise to update you on this thread once a solution is available. 


Ramyer M. 

Intel Customer Support Technician 


0 Kudos
RaysinToast
Beginner
174 Views

Hello

 

I have upgraded to driver 31.101.5534

 

Still same issue - still getting 1280x720 as only output no matter what resolution i select for the virtual camera

 

I have tested the camera on my Nvidia card and it's broadcast software outputs to 1920x1080 with same setup, the INTEL software still only outputting to 1280x720

 

has there been any development?

0 Kudos
Reply