MAX+PLUS II Licenses don't seem to work for VHDL and Verilog Applications.

[Eagle_Savy]

Hi All,

I have installed MAX+PLUS II version 10.2 and obtained 2 licenses from the Intel online License Portal.  Upon setting up both licenses (in turn), the Software (MAX+PLUS II  10.2) recognised the FPGA Device I am intending to use; but does not support neither VHDL nor Verilog Applications.

Could anyone please, help?

Thank you.

V.

 

 

[Eagle_Savy]

Dear All,

Is it possible to get help with this license issue here in this forum?

Please, help!  I am losing extremely valuable Project time with this obstacle!!!

Kind regards

V.

[AR_A_Intel]

Hello

Welcome to INTEL forum. Apologize for the inconvenience happen; to further check, could you provide details

Name :

Email Address :

Company Name :

Company Address :

NICID/Mac Address :

Attach license.dat file

For privacy, reply/attach file in private message.

[Eagle_Savy]

Hi,

 Thank you for coming back to me on this, and I hope we find a resolution very quickly.

I will email you immediately by returning the private email with all the details requested.

Kind regards

V.

[Eagle_Savy]

Hi,

Please, find details below as requested:

Name : Victor

Email Address : vicor.ilunga@kasaitechnologiesgroup.com

Company Name : Kasai Technologies Group

Company Address : 10 England Crescent, Leamington Spa, CV31 3JH, England, United Kingdom 

NICID/Mac Address : 40EC992E0E00

Kind regards

V.

[AR_A_Intel]

@Eagle_Savy, We PM you a private message. Hope you received it. 

[Eagle_Savy]

Hi,

All my responses to what I believe to be private email are bouncing back as "Not delivered" messages to you.

But essentially, 

Yes, please, help me by generating a MAX+PLUs II License that has VHDL for now so I can resolve the current obstacle.  I will look to move to Quartus as swiftly as possible after this.

Please, help me resolve this current issue promptly.

Thanks ever so much. 

V.

[FvM]

Hello,
I reviewed the license file. It contains feature maxplus2web, which doesn't enable VHDL and Verilog entry.

You need license for feature maxplus2 or equivalent individual features.

If I remember right, it was written by Intel officials in support forum, that the respective license can be obtained if you have a current Quartus Std license.

Regards
Frank

[Eagle_Savy]

Hi Frank,

If my understanding of your statement in your last email is correct, that, if I obtain the license for Quartus II Prime Pro or Standard (Version 24.2 as an example), this will also allow me to use MAX+PLUS II for legacy products including the Altera FLEX 81500AQC240-2.

If this statement is correct, then I would like to obtain the license for Quartus II Prime Pro which I have now installed on my machine; please advise on how to obtain the License.

Many thanks for your anticipated help.

V.

[FvM]

Hi,
unfortunately I don't remember where I saw the mentioned statement in Intel forum. You should ask Intel support if they can provide a full maxplus2 license supplementing your Quartus subscription.

[Eagle_Savy]

Hi there,

Thank you for your response.

Please, give me the contact details of whom in Intel I should contact.

Ver appreciated.

V.

[_AK6DN_]

"... then I would like to obtain the license for Quartus II Prime Pro which I have ..."

I believe that license can be purchased at Intel/Altera distributors. Something like US$3000 or so IIRC.

[AR_A_Intel]

For details. Please find the contact for our sales and distributor near you from link below: https://www.intel.com/content/www/us/en/partner/where-to-buy/overview.html   

[AR_A_Intel]

With your confirmation in separate email. I will now transition this thread to community support If you have a new question, Please login to https://supporttickets.intel.com/s/?language=en_US , view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.

[Eagle_Savy]

Hi Everyone,

Thank you for your help in helping me revive my VHDL programming skills, and I am doing really well.

I have now completed my entire overall Software  for my system Design in MAX+PLUS II in order to reuse my Legacy FLEX8000 Device, and it has worked thus far.  However, after assigning the device and pins to the inputs and outputs of the design, I have received the warning about "one of the NODEs having the assignment but the Node in question does not exist or is a primitive array" (see attached).

I have never seen this ever before.  Anybody with an idea of how I can go about fixing this, please?

Thank you for your anticipated help again.

V.