GUNZIP: uncompress, out-of-mem or overwrite error

[Altera_Forum]

After loading dtb & kernel via nfs, I boot the kernel and then see this error 

 > bootm 0xD6000000 - 0xD5000000# # Booting kernel from Legacy Image at d6000000 ...  Image Name: Linux-3.19.0-dirty  Image Type: NIOS II Linux Kernel Image (gzip compressed)  Data Size: 1686478 Bytes = 1.6 MiB  Load Address: d6000000  Entry Point: d6000000  Verifying Checksum ... OK# # Flattened Device Tree blob at d5000000  Booting using the fdt blob at 0xd5000000  Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover  These are my NIOS entries in the kernel .config CONFIG_NIOS2=y CONFIG_NIOS2_MEM_BASE=0x10000000# CONFIG_NIOS2_DTB_AT_PHYS_ADDR is not set# CONFIG_NIOS2_DTB_SOURCE_BOOL is not set CONFIG_NIOS2_HW_MUL_SUPPORT=y# CONFIG_NIOS2_HW_MULX_SUPPORT is not set CONFIG_NIOS2_HW_DIV_SUPPORT=y# CONFIG_NIOS2_FPU_SUPPORT is not set# CONFIG_NIOS2_CI_SWAB_SUPPORT is not set CONFIG_NIOS2_CI_SWAB_NO=0 CONFIG_NIOS2_DCACHE_SIZE=0x8000 CONFIG_NIOS2_DCACHE_LINE_SIZE=0x20 CONFIG_NIOS2_ICACHE_SIZE=0x8000 CONFIG_NIOS2_ALIGNMENT_TRAP=y CONFIG_NIOS2_CMDLINE_IGNORE_DTB=y CONFIG_NIOS2_PASS_CMDLINE=y CONFIG_NIOS2_KERNEL_MMU_REGION_BASE_BOOL=y CONFIG_NIOS2_KERNEL_MMU_REGION_BASE=0x80000000 CONFIG_NIOS2_KERNEL_REGION_BASE_BOOL=y CONFIG_NIOS2_KERNEL_REGION_BASE=0xD6000000# CONFIG_NIOS2_IO_REGION_BASE_BOOL is not set CONFIG_NIOS2_IO_REGION_BASE=0xe0000000   Probably there is something missing or wrong here - the default config file which I downloaded seems out of date. Kernel is 3.19 RAM is from 0xD0000000 to DFFFFFFF  (I did a search, but didn't find any results)  Thanks