Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
Announcements
All support for Intel NUC 7 - 13 systems has transitioned to ASUS. Read latest update.
12583 Discussions

NAND U-Boot for Arria10 Soc Development Kit stucks

Altera_Forum
Honored Contributor II
1,090 Views

Hi Everybody, 

 

I'm using GSRD 16.1 and EDS 16.1 on Fedora 25 (64bit) OS. 

Using the procedure described at https://rocketboards.org/foswiki/documentation/a10gsrd161nandboot, I built a U_BOOT for NAND, while keeping the prebuilt binaries untouched but it doesn't come up. 

Replacing my U-BOOT with the prebuilt U-BOOT - and it works fine. 

 

On the other hand, 

Replacing the daughterboard with the microSD daughterboard: 

Building my U-BOOT for microSD and using the associated procedures in http://www.alterawiki.com/wiki/socedsgettingstarted, everything works smoothly. 

 

I'm attaching a log for the NAND buildup. 

Any clues?
0 Kudos
1 Reply
Altera_Forum
Honored Contributor II
304 Views

Hi, 

 

If the time permits, please use the tested and supported operating system for this example. Feroda is not a tested version. 

 

 

 

Regards, 

CloseCL 

(This message was posted on behalf of Intel Corporation)
0 Kudos
Reply