Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
Announcements
All support for Intel NUC 7 - 13 systems has transitioned to ASUS. Read latest update.

NIOS II Console shows nothing

Altera_Forum
Honored Contributor II
899 Views

Hello, 

 

I am trying to run a very simple nios system with a timer and onchip memory with RTOS hello program using Quartus 11 and QSYS but the console shows nothing . I tried to run a hello world example but it doesn't work too. 

 

The console shows : 

Starting processor at address 0x000801B4 

 

then nios II console shows nothing and neither does the command shell. 

 

The onchip memory reset vector address is 0x8000000 

 

The system is attached and I am using a pll but it only multiplies by 1.
0 Kudos
1 Reply
Altera_Forum
Honored Contributor II
213 Views

I solved the problem by using an old project that used to work. I don't know what is the cause of this problem or when it happens.

0 Kudos
Reply