problem with nios2 cypress sram controller

Nios® V/II Embedded Design Suite (EDS)

Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++

problem with nios2 cypress sram controller

871 Views

I'm using a cyclone 3 and a cypress Sram cy7c1380d.

This sram has a 512kB * 36 dimension, but in the sopc builder, the sram controller dosen't support this dimension(only 1M*18, 2M and 4M are supported).

i tried to use the 1M*18 controller, it requires 20 pins assignment for the address, but my own sram has only 19 pins for address. And the failure of a helloworld test with nios ide turns out that a controller of 512kB*36 dimension (which has only 19 pins for address) is necessary.

Have you guys ever met this problem?

can anyone help me with this? it drives me crazy!! :(

ps: using quartus 10.0 and sopc builder 10.0

Link Copied

0 Replies

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.