- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We wanted to know that if it is possible to configure Intel i7 12th gen processor installed on a PCE-5133 Single board Computer as an PCIe Endpoint ?
Can this be achieved while running Ubuntu & by writing a custom driver ?
Thanks & Regards,
Sujan
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello sujan19,
Thank you for posting in the communities. To be more specific with our answers, do you have a specific 12th gen CPU model in mind? About the custom drivers, are these drivers created by you as well? I will be waiting for your reply.
Ramyer M.
Intel Customer Support Technician
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ramyer,
Yes we are using a - CORE I7 2.1G 25M 12C 1700P I7-12700 (96MPI7A-2.1-25M17) on our SBC.
We don't have a custom driver. We wanted to check if there is a dedicated PCIe Endpoint driver for linux (any) supported by Intel ?
Can you provide any example on how to set it up ?
Thanks,
Sujan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ramyer,
Note: Additional info on our setup.
PCE-5133 SBC with Intel I7 12th gen (Root Port) <----- PCIe Gen 3.0 Interface -----> PCE-5133 SBC with Intel I7 12th gen (Endpoint)
We want to setup ingress translation such that we can exchange data between both SBC's .
Since the by default Ubuntu is configured as Root Port, we are keeping it as it is.
Hence, we want to configure the other SBC as PCIe Endpoint.
Thanks,
Sujan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ramyer M,
we are also facing the same issue and require your support
card : https://www.advantech.com/en/products/1-2jkp2l/pce-5133/mod_9dd4a86e-6bff-42a8-bf2f-4b8f1ccc2189
processor : 96MPI7A-2.1-25M17- CORE I7 2.1G 25M 12C 1700P I7-12700 ( https://www.advantech.com/en/products/7e17429b-a827-4726-bb7b-97613687e707/96mpi7a-21-25m17/mod_ce067573-21ff-437d-9b78-50eb267ea997)
can you please provide the method to enable this card as end point .
Scenario: We have two Advantech PCE-5133 cards. One of these cards is already configured as the root point (which is the default configuration). The other identical card will serve as the end point for memory mapping.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello sujan19,
Thank you for sharing this information. Let me coordinate this inquiry with my team and get back to you as soon as possible.
As for Rajesh_kumar_krishnan, thank you for engaging in our community. To give you the full focus of our support we highly recommend creating a new thread. I assure you that we will be on the lookout on this new thread that you will create. Thank you!
Ramyer M.
Intel Customer Support Technician
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page