cancel
Showing results for 
Search instead for 
Did you mean: 

Intel 600p SSD problem with TRIM

AKoto2
New Contributor

Hello,

Available:

ASUS_PRIME_Z270_P

M. 2 x 4 PCI-Express 3.0 Intel SSD 128 Gb SSDPEKKW128G7X1 600p

Windows 7 SP1 + hotfix for NVMe

Driver: Standard controller NVM Express (stornvme.sys)

Question.

Can not understand, running TRIM or not. When you restart, after a short wait, TrimCheck displays the following:

" First 16 bytes: AE 41 07 45 6C 5F 27 38 EC 17 A0 84 21 52 38 9F...

Data is neither unchanged nor empty.

Possible cause: another program saved data to disk,

overwriting the sector containing our test data.

CONCLUSION: INDETERMINATE.

Re-run this program and wait less before verifying / try to

minimize writes to drive C:."

Codes in the "First 16 bytes:" are constantly the same, instead of 00. What's the problem?

Thankful in advance.

28 REPLIES 28

idata
Esteemed Contributor III

Hello Wildcat55,

We'd like to know first where did you get the message for the TrimCheck?Is this disk your boot drive or storage drive?Are you using the Intel® Solid-State Drive Toolbox?Besides this, is the SSD having an issue?We'll wait for your response.Regards,Nestor C

AKoto2
New Contributor

We'd like to know first where did you get the message for the TrimCheck?

TrimCheck is a utility for check of operability of the TRIM function. https://github.com/CyberShadow/trimcheck https://github.com/CyberShadow/trimcheck

Is this disk your boot drive or storage drive?

It is a boot drive.

Are you using the Intel® Solid-State Drive Toolbox?

Yes, I use. Only she doesn't decide what questions concerning this drive.

Besides this, is the SSD having an issue?

Other problems aren't revealed yet.

Long didn't respond because of time difference, thanks.

idata
Esteemed Contributor III

Hi Wildcat55,

Thanks for the information provided.We will be looking at this and we will get back to you after some research.Regards,Nestor C

idata
Esteemed Contributor III

Hello Wildcat55,

In the meantime, is there any way you can send us the SMART log from Intel® Solid-State Drive Toolbox?You need to click on the export button and then save the *.csv file here. (Make sure to use the advanced editor when attaching the file).Regards,Nestor C