- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi All,
I want to measure the FSB address bus utilization to identify the bottleneck of
DB benchmark, there are lots of events in the event list, but i don't know which event
should be used. There is a server in my lab which is Xeon E5310.
All events are list here:
BUS_REQ_OUTSTANDING: (counter: all)
Outstanding cacheable data read bus requests duration (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_BNR_DRV: (counter: all)
Number of Bus Not Ready signals asserted (min count: 500)
Unit masks (default 0x0)
----------
0x00: this agent
0x20: include all agents
BUS_DRDY_CLOCKS: (counter: all)
Bus cycles when data is sent on the bus (min count: 500)
Unit masks (default 0x0)
----------
0x00: this agent
0x20: include all agents
BUS_LOCK_CLOCKS: (counter: all)
Bus cycles when a LOCK signal is asserted (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_DATA_RCV: (counter: all)
Bus cycles while processor receives data (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_BRD: (counter: all)
Burst read bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_RFO: (counter: all)
number of completed read for ownership transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_WB: (counter: all)
number of explicit writeback bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_IFETCH: (counter: all)
number of instruction fetch transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
&nbs p; 0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_INVAL: (counter: all)
number of invalidate transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_PWR: (counter: all)
number of partial write bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRANS_P: (counter: all)
number of partial bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRANS_IO: (counter: all)
number of I/O bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRANS_DEF: (counter: all)
number of completed defer transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_BURST: (counter: all)
number of completed burst transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_MEM: (counter: all)
number of completed memory transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_ANY: (counter: all)
number of any completed bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
Thx
yyan
I want to measure the FSB address bus utilization to identify the bottleneck of
DB benchmark, there are lots of events in the event list, but i don't know which event
should be used. There is a server in my lab which is Xeon E5310.
All events are list here:
BUS_REQ_OUTSTANDING: (counter: all)
Outstanding cacheable data read bus requests duration (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_BNR_DRV: (counter: all)
Number of Bus Not Ready signals asserted (min count: 500)
Unit masks (default 0x0)
----------
0x00: this agent
0x20: include all agents
BUS_DRDY_CLOCKS: (counter: all)
Bus cycles when data is sent on the bus (min count: 500)
Unit masks (default 0x0)
----------
0x00: this agent
0x20: include all agents
BUS_LOCK_CLOCKS: (counter: all)
Bus cycles when a LOCK signal is asserted (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_DATA_RCV: (counter: all)
Bus cycles while processor receives data (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_BRD: (counter: all)
Burst read bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_RFO: (counter: all)
number of completed read for ownership transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_WB: (counter: all)
number of explicit writeback bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_IFETCH: (counter: all)
number of instruction fetch transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
&nbs p; 0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_INVAL: (counter: all)
number of invalidate transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_PWR: (counter: all)
number of partial write bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRANS_P: (counter: all)
number of partial bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRANS_IO: (counter: all)
number of I/O bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRANS_DEF: (counter: all)
number of completed defer transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_BURST: (counter: all)
number of completed burst transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_MEM: (counter: all)
number of completed memory transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
BUS_TRAN_ANY: (counter: all)
number of any completed bus transactions (min count: 500)
Unit masks (default 0x40)
----------
0xc0: core: all cores
0x40: core: this core
0x00: bus: this agent
0x20: bus: include all agents
Thx
yyan
Link Copied
1 Reply
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yyan,
2*(BUS_TRANS_ANY.ALL_AGENTS)/(bus frequency) gives you the address bus utilization.
e.g. if you see 123,456,789 events in 1 second and have a FSB freuency of 333MHz, this would imply 2*123,456,789 / 333,000,000 = 74% address bus utilization.
Kind regards
Thomas
![](/skins/images/D2683F18326913BBA0436CB7114DD569/responsive_peak/images/icon_anonymous_message.png)
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page