Edge Software Catalog
Support for issues related to Edge Software Catalog
473 讨论

ECI-A issue: hang when enter ACRN

HarrisLai
初学者
4,468 次查看

I followed the ECI-A install guide to create a bootable USB (have 2VMs, windows and linux) and then installed image to target uBuntu 18.04, and then reboot again to see the grup menu(one is Linux another is ACRN). when I enter ACRN, hang there and show booting 'ACRN' warnning: no console will be avaliable to OS as the attached.

 

My target:

coffee lake (i5-9500TE)

6 cores(s) / 6 Thread(s)

8GB RAM

标签 (1)
0 项奖励
4 回复数
Jia-Shing_W_Intel
主持人
4,440 次查看

Hi,

I would recommend that you first start with hardware from the validated list so we know the hardware and BIOS combination supports ACRN.

The following platforms have been validated for ACRN with ECI 2.5:

If, with one of these platforms, you still run into this issue, you might want to double check your BIOS settings and make sure those that are ACRN-related are properly configured. This is a common reason that leads to this issue.

 

JiaShing_W_Intel_0-1635160689828.png

 

0 项奖励
HarrisLai
初学者
4,368 次查看

Hi Jia-Shing_W,

 

On this coffee lake platform (i5-9500TE),

the BIOS is American Megatrends, Inc.

I can only see some settings as red block in the attached file. (These settings are what I use now).

 

0 项奖励
ChunSheong_F_Intel
主持人
4,257 次查看

Hi Harris,

 

Which profile did you use when you are building the ECI-A image? Do you disable Hyperthreading on your bios?

0 项奖励
Jia-Shing_W_Intel
主持人
4,245 次查看

Hi Harris,

 

I also find VT-d is used by ACRN. Without enabling it in BIOS, you also can get stuck at boot. Are you able to get help from the BIOS vendor to make these options exposed in the menu?

0 项奖励
回复