How to enable i210 in u-boot?

[unitik]

Hi,

My platform is armV8. I am trying to enable intel I210AT GNIC in u-boot. My I210 is an on board PCIe device. And I have checked that e1000 driver was built and contained in the uboot image. I guess I need to configure my device tree, too.

Could you provide me with an example to configure this I210 device node? Thanks!

[CarlosAM_INTEL]

Hello, @unitik:

Thank you for contacting Intel Embedded Community.

We want to address the following questions to understand this situation:

Could you please clarify if this request is related to the Intel® Ethernet Controller I210 design developed by you, or is a Network Interface Card (NIC) or add-in card developed by a third-party company?

Could you please let us know the name of the manufacturer, the part number, and where we can find the information on this device if it is a third-party design?

We are waiting for your answer.

Best regards,

@CarlosAM_INTEL.

[unitik]

Hi,

Thank you for the quick response.

We are currently testing with intel Manufacturer i210AT as shown in

https://www.intel.sg/content/www/xa/en/products/sku/64400/intel-ethernet-controller-i210at/specifications.html?countrylabel=Asia%20Pacific

also we have custom board designed by us.

Thanks

unitik

[CarlosAM_INTEL]

Hello, @unitik:

Thanks for your clarification.

Your u-boot consultation should be addressed as a reference to the channels listed on the following website:

https://github.com/u-boot/u-boot/pulls

Best regards,

@CarlosAM_INTEL.