Embedded Connectivity
Intel network controllers, Firmware, and drivers support systems
866 Discussions

about intel 82567 GbE Physical Layer Transceiver

mitsuhashi
Beginner
1,368 Views

intel 82567 GbE Physical Layer Transceiver.
Q1: Is there a built-in feedback resistor between X'TAL2 and X'TAL1?
Q2: What is the resistance value when a feedback resistor is built in?

      from <email removed>

0 Kudos
11 Replies
AndrewG_Intel
Employee
1,347 Views

Hello @mitsuhashi

Thank you for posting on the Intel® communities.


In order to understand better this request, could you please confirm the following details?

1- Is this request regarding an Intel® NUC product? If so, please confirm the model of your Intel® NUC:

2- Is the Intel® 82567 GbE Physical Layer Transceiver a component (e.g.: Ethernet port/controller) that is part of the Intel® NUC?

3- Just to make sure that we have the correct information, what does it mean when you refer to "X'TAL2 and X'TAL1"?

4- Why are you looking for this information? Are you developing hardware or software using Intel® Products?


Best regards,

Andrew G.

Intel Customer Support Technician


0 Kudos
mitsuhashi
Beginner
1,333 Views

Hi Andrew G.

Intel Customer Support Technician

 

 

My question doesn't seem to be an Intel® NUC product.
I have a question for LAN controller 82567V.
Please tell me the question site.

 

 

from  <email removed>

Best regards,

0 Kudos
AndrewG_Intel
Employee
1,294 Views

Hello mitsuhashi

Thank you for your response.


We understand this request is regarding an Intel® 82567V Gigabit Ethernet Controller. We have a forum for those specific products and questions so we are moving it to the Ethernet Products Forum so it can get answered more quickly.


Best regards,

Andrew G.

Intel Customer Support Technician


0 Kudos
Caguicla_Intel
Moderator
1,269 Views

Hello mitsuhashi,


Thank you for posting in Intel Ethernet Communities. 


Please share the following information that would help in checking your request.


  1. Are you customizing or designing your own board?
  2. Does your inquiry involves design or customization?
  3. Reason why you need the information requested.
  4. Will you be able to share more details regarding your intended setup?


Awaiting to your reply.


We will follow up after 3 business days in case we don't hear from you. 


Best regards,

Crisselle C.

Intel® Customer Support


0 Kudos
mitsuhashi
Beginner
1,263 Views

Hello Crisselle C.

Q1:Are you customizing or designing your own board? →NO
Q2:Does your inquiry involves design or customization?→NO
Q3:Reason why you need the information requested.
→Rf (feedback resistance) is required to determine the constant of the crystal unit connected to 82567.
Is it built in 82567?
What Ω would it be if it was built into 82567?
Q4:Will you be able to share more details regarding your intended setup?→yes

Best regards,
mitsuhashi

0 Kudos
Caguicla_Intel
Moderator
1,246 Views

Hello mitsuhashi,


Thank you for the reply. 


Please share more details regarding your intended setup since you answered yes for Q4. This will help us further check your query. 


Looking forward to your reply. 


We will follow up after 3 business days in case we don't hear from you. 


Best regards,

Crisselle C.

Intel® Customer Support


0 Kudos
mitsuhashi
Beginner
1,229 Views

Hello Crisselle C.

Intel® Customer Support

 

This is a hardware question。

 

Best regards,

mitsuhashi

0 Kudos
Caguicla_Intel
Moderator
1,224 Views

Hello mitsuhashi,


Thank you for the reply. 


Please allow us to further check this with our engineers. We will get back to you as soon as we heard from them but no later than 3 business days. 


Hoping for your kind patience. 


Best regards,

Crisselle C.

Intel® Customer Support 


0 Kudos
Caguicla_Intel
Moderator
1,208 Views

Hello mitsuhashi,


Thank you for the patience. 


After checking with our engineers, please be informed that your query will be best answered by our Embedded Connectivity Support team. We will help you to move this post to the designated team for further assistance. Please feel free to contact us if you need assistance from Ethernet support team.


Best regards,

Crisselle C.

Intel® Customer Support


0 Kudos
CarlosAM_INTEL
Moderator
1,188 Views

Hello, @mitsuhashi:

Thank you for contacting Intel Embedded Community.

You need to update your account to the premier option to help you. You should fill out the form stated on the following website:
https://www.intel.com/content/www/us/en/forms/developer/premier-registration.html
You should use a business email address to evade any inconvenience. Please avoid the free email provider's address (such as the provided by Hotmail, Gmail, Yahoo, or others).

Best regards,

@CarlosAM_INTEL.

0 Kudos
mitsuhashi
Beginner
1,176 Views

Hello

 

 Intel® 82567V Gigabit Ethernet Phy This is a hardware question.

Matching information with the crystal unit.

Q1: Is there a built-in feedback resistance between Xtal1 and Xtal2?

Q2: If a feedback resistor is built in, what is it?

0 Kudos
Reply