unable to initialize adapter 1code c86a200d

[QST]

After i tried to change the device ID with the eeupdate64e tool,The ‘/mac’ command is currently not functioning correctly.how should i solve this problem and how to avoid this problem again?

[Diego_INTEL]

Hello @QST,

Thank you for contacting Intel Embedded Community.

What ethernet controller are you using? Is it a blank device?

Best regards,

@Diego_INTEL

[QST]

Hello @Diego_INTEL ,

Thank you for your reply. My idea was to modify the i219-lm (8086-157b) to i217-lm (8086-153a). I used eeupdate to change the 0d bit in its EEPROM. After the modification, error code c86a200d occurred, and now I have restored it to its original state.Could you please advise on how I should proceed to realize the idea of modifying the i219-lm (8086-157b) to i217-lm (8086-153a)?

Best regards,

@QST

[Diego_INTEL]

Hello @QST,

No, my apologies, you can only use the images for the i219 available, as I know, there are some images that are compatible for different SKUs for the same controller but I have not seen anything like to change the image to show a different controller name.

Best regards,

@Diego_INTEL

[QST]

Hello @Diego_INTEL ,

Thank you for the clarification and for your detailed explanation.

Best regards,

@QST