Access to FIT (flash image tool)

[matthiasbendewald]

I need to use the flash image tool to continue my work. 

I work for Siemens, am part of the development team for a train based computing unit. That is based upon an Intel Atom Apollo lake CPU; we use a Kontron mAL10 to be specific.

I mainly participate on the implementation for the coreboot bootloader on that system; now we need to adjust the ROM file / IFWI part for the Intel CSM. To do that I need the FIT (flash image tool) to adjust this to our specific board.

Maybe I need some more documentation, I just start to understand those things in deeper details.

[CarlosAM_INTEL]

Hello, @matthiasbendewald:

Thank you for contacting Intel Embedded Community.

You should address your consultation related to the cited third-party device as a reference by filling out the form stated on the following website:

https://www.kontron.com/en/contact

However, you may find information that may help you in the documents stated on the following websites:

https://www.coreboot.org/images/2/23/Apollolake_SoC.pdf

https://review.coreboot.org/c/coreboot/+/13706

https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/M3IQEENNDW7FJ4YKTSMH5K2UET3T5DF7/

https://review.coreboot.org/c/coreboot/+/30992

Best regards,

@CarlosAM_INTEL.

[matthiasbendewald]

Hallo @CarlosAM_INTEL ,

This was not helpful unfortunately. My Kontron contact told me to contact Intel. They are not legally allowed to sent me the FIT tool.

Could this be done in any way? I just don't know the path to go from here on to get the tools I need for the intel chip.

Best regards,

Matthias

[CarlosAM_INTEL]

Hello, @matthiasbendewald:

Thanks for your reply.

We sent an email to the address related to your account with information that may help you.

Best regards,

@CarlosAM_INTEL.