Embedded Intel Atom® Processors
Intel Atom® Hardware, Software, Firmware, Graphics
Announcements
Welcome to the Intel Community. If you get an answer you like, please mark it as an Accepted Solution to help others. Thank you!

FSP with debug info

ZVere
Beginner
830 Views

Hello,

 

I got the following output after compiling coreboot with a debug FSP for baytrail:

 

============= PEIM FSP v1.0 (VLYVIEW0 v0.0.3.5) =============

Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE

Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3

Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A

The 0th FV start address is 0x000FFFE0400, size is 0x00017C00, handle is 0x0

Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39

Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38

Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6

Install PPI: DBE23AA9-A345-4B97-85B6-B226F1617389

 

Install PPI: 06E81C58-4AD7-44BC-8390-F10265F72480

Install PPI: 01F34D25-4DE2-23AD-3FF3-36353FF323F1

 

Install PPI: 49EDB1C1-BF21-4761-BB12-EB0031AABB39

Notify: PPI Guid: 49EDB1C1-BF21-4761-BB12-EB0031AABB39, Peim notify entry point: FFFE0FE4

The 1th FV start address is 0x000FFFB0000, size is 0x0002F400, handle is 0xFFFB0000

 

Install PPI: A55D6970-1306-440C-8C72-8F51FAFB2926

 

PcdMrcInitTsegSize = 8

PcdMrcInitMmioSize = 800

PcdMrcInitSPDAddr1 = A0

PcdMrcInitSPDAddr2 = A2

Setting BootMode to 0

Install PPI: 1F4C6F90-B06B-48D8-A201-BAE5F1CD7D56

Register PPI Notify: F894643D-C449-42D1-8EA8-85BDD8C65BDE

About to call MrcInit();

BayleyBay Platform Type

AutoSelfRefreshEnable = 0x2

RID = 0x11.

Reg_EFF_DualCH_EN = 0x100301C0.

CurrentMrcData.BootMode = 4

C0.D0: SPD not present.

C1.D0: SPD not present.

 

What should I do with this information ?

Should I use it in Intel's BCT to modify some default FSP values ?

or should I use it to modify the current devicetree.cb ?

 

Is there a detailed documentation explains what is the meaning of each line in the messages I got ?

 

Thank you,

Zvika

0 Kudos
1 Reply
CarlosAM_INTEL
Moderator
225 Views

Hello, @ZVere​:

 

Thank you for contacting Intel Embedded Community.

 

We suggest you refer to the suggestions and information stated in the Intel(R) Firmware Support Package [FSP] for Intel(R) Atom(TM) Processor E3800 Product Family: Integration Guide document # 331165 that may answer your questions.

 

This document can be found at the following website:

 

https://www.intel.com/content/dam/www/public/us/en/documents/guides/atom-e3800-fsp-integration-guide...

 

We hope that this information is useful to you.

 

Best regards,

@Mæcenas_INTEL​.  

Reply