Embedded Intel® Core™ Processors
Intel® Core™ Hardware, Software, Firmware, Graphics
Announcements
Welcome to the Intel Community. If you get an answer you like, please mark it as an Accepted Solution to help others. Thank you!
For the latest information on Intel’s response to the Log4j/Log4Shell vulnerability, please see Intel-SA-00646

Reference design for NHI350AM2

VSavi1
Beginner
1,593 Views

Hi,

My name is Vitaliy.

For our new board we chose NHI350AM2 (2 copper ports)

There are some questions

1. Is there a reference design for NHI350AM2?

2. We want to use a built-in 1.8 / 1.0 converter, but in the section "3.5.2 1.0V SVR Control" the is not an example of the calculation of the nominal elements.

We have a X540 / I350-BT2 Reference Design, but there is not enough information for us

0 Kudos
1 Solution
idata
Community Manager
307 Views

Hi,

please refer to the following document http://www.intel.com/content/dam/www/public/us/en/documents/reference-guides/ethernet-controller-i35... I350 REFERENCE DESIGN.

Hope this helps,

Jimmy.

View solution in original post

3 Replies
idata
Community Manager
306 Views

Hello Vitaliy,

Welcome to the Intel Embedded Community,

We're working in your case, we will contact you as soon as possible with additional information.

Regards,

Jimmy.

idata
Community Manager
308 Views

Hi,

please refer to the following document http://www.intel.com/content/dam/www/public/us/en/documents/reference-guides/ethernet-controller-i35... I350 REFERENCE DESIGN.

Hope this helps,

Jimmy.

View solution in original post

VSavi1
Beginner
306 Views
Reply