Require Icepack Model for Intel Xeon 2276ME

[Pkaur]

Hello Sir/mam

We are using Intel Xeon 2276ME and CM246 PCH in our design . For running thermal analysis we will be requiring Icepack model for both Xeon and PCH. could you please provide the same.

[Jaime_Lizarme]

Hi @Pkaur ,

Thank you for contacting the Intel Embedded Community.

The thermal and mechanical information for the CM246 can be found on RDC# 566757, and for the CPU please refer to RDC #604731

In case you don't have access to RDC, then go through the following instructions described on the below article.

https://www.intel.com/content/www/us/en/support/articles/000058073/programs/resource-and-documentation-center.html

Best regards,

Jaime L.

[Pkaur]

Hello Jaime

We have RDC access but I'm not able to locate document 604731. We mainly need thermal conductivity of materials which makes CPU and PCH. Could you please help for the same.

[Pkaur]

HI 

We are at critical design stage . Could you please reply on it, this is inducing delay in project .

[Jaime_Lizarme]

Hello @Pkaur 

Thank you for contacting the Intel® Embedded Community. 

If you don't have access to the referred documents, then please contact the distributor/point of purchase where you bought the CPU related to your request, or a local Intel Field/Sales office in your region for assistance in possibly receiving access to Intel Premier Support (IPS) or have an IPS case opened on your behalf.

Best regards,

Jaime L.

Intel Customer Support Engineer

[Pkaur]

Hello Jaime

Thank you for your response