- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Experts; I am trying to bring up LACP bond over SRIOV VFs which have been extended to a VNF. On network switch LACP is enabled and similarly inside VNF LACP bond is enabled but LACP packets are not passed over SRIOV VF. On hypervisor side for PF I have turned spoof checking and trust is on.
ip link show eno2
5: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether bc:30:5b:f2:3f:72 brd ff:ff:ff:ff:ff:ff
vf 0 MAC ca:c4:b7:45:35:73, spoof checking on, link-state auto, trust off, query_rss off
vf 1 MAC 16:b2:6e:1e:c1:9d, spoof checking on, link-state auto, trust off, query_rss off
vf 2 MAC 16:87:22:43:4f:39, spoof checking on, link-state auto, trust off, query_rss off
vf 3 MAC 4c:96:14:c2:0c:40, vlan 2040, spoof checking off, link-state auto, trust on, query_rss off
lshw -c network -businfo
Bus info Device Class Description
===========================================================
pci@0000:01:00.1 eno2 network Ethernet Controller 10-Gigabit X540-AT2
pci@0000:01:10.1 enp1s16f1 network Illegal Vendor ID
pci@0000:01:10.3 enp1s16f3 network Illegal Vendor ID
pci@0000:01:10.5 enp1s16f5 network Illegal Vendor ID
pci@0000:01:10.7 network Illegal Vendor ID
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
ethtool -i eno2
driver: ixgbe
version: 5.1.0-k
firmware-version: 0x8000039c
expansion-rom-version:
bus-info: 0000:01:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
root@compute-1:~#
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello knawa1,
Thank you for posting in Intel Ethernet Communities.
We'd like to check if you have already tried the latest Physical Function (PF) and Virtual Function (VF) drivers from the link below?
PF 5.6.5
VF version 4.6.3
We look forward to your response.
In case we don't hear from you, we will follow up after 3 business days.
Best regards,
Crisselle Franz
Intel® Customer Support Technician
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello knawa1,
Good day!
Please provide the requested information for us to check on your request.
Awaiting to your response.
In case we don't hear from you, we will follow up after 3 business days.
Best regards,
Crisselle Franz
Intel® Customer Support
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello knawa1,
How are you doing today?
Please be informed that we will now close this request since we haven't received any response from our previous follow ups. Just feel free to post a new question if you may have any other inquiry in the future.
May you have an amazing day!
Best regards,
Crisselle Franz
Intel® Customer Support
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page