FPGA Intellectual Property
PCI Express*, Networking and Connectivity, Memory Interfaces, DSP IP, and Video IP
The Intel sign-in experience is changing in February to support enhanced security controls. If you sign in, click here for more information.
6064 Discussions

can't get any response from TSE core

Honored Contributor II

hi all, 


I want to use the TSE megacore without NIOS processor. The problems is that I can't get any response from the core, even when I set the tse as the top-level entity and reset it. The wave of modelsim is attached. Is there any option that I missed or wrong operation? Thanks a lot in advance.
0 Kudos
1 Reply
Honored Contributor II

have solved the problem. it was due to the .do file generated by quartus. 


transcript on if {} { vdel -lib rtl_work -all } vlib rtl_work vmap work rtl_work vcom -93 -work work {D:/WyBaby/Documents/SIEMENS/FPGA/Project/9_2frame_1/src/tse_mac.vho} vcom -93 -work work {D:/WyBaby/Documents/SIEMENS/FPGA/Project/9_2frame_1/src/tse_mac.vhd} vlog -vlog01compat -work work +incdir+D:/WyBaby/Documents/SIEMENS/FPGA/Project/9_2frame_1/src/triple_speed_ethernet-library {D:/WyBaby/Documents/SIEMENS/FPGA/Project/9_2frame_1/src/triple_speed_ethernet-library/altera_tse_reset_synchronizer.v} vcom -93 -work work {D:/WyBaby/Documents/SIEMENS/FPGA/Project/9_2frame_1/simulation/modelsim/tse_mac_tb.vhd} vsim -t 1ps -L altera -L lpm -L sgate -L altera_mf -L altera_lnsim -L cycloneive -L rtl_work -L work -voptargs="+acc" tse_mac_vhd_tst add wave * view structure view signals run 100 us  


i changed the position of line 8 and line 9 and 'do run_msim_rtl_vhdl.do', then it gave the right output. 


then what is the .vho file and how does it work? thx a lot in advance.