Intel i5 10400F with Intel Arc A750

[Sukanta]

I have intel i5 10400f and currently using gt710 GPU. Just thinking to buy intel arc A750. Just want to know should I and will there be any bottleneck as I want to use it mostly for video editing.

Thank you

[MUC · Accepted solution]

This depends primarily on your motherboard:

What Is Resizable BAR and How Do I Enable It?

[Sukanta]

The motherboard is Gigabyte B410m S2 V2

[MUC]

There is nothing wrong with using an Intel Arc A750 on this platform. Please update the BIOS to latest version F5 and set the following:

• Advanced Mode → Settings → Above 4G Decoding → Enabled
• Advanced Mode → Settings → Re-Size BAR Support → Auto
• Advanced Mode → Boot → CSM Support → Disabled
• Advanced Mode → Save & Exit

[Sukanta]

Thanks a lot. Just one more thing, I currently have Corsair 500W PSU. But when I check recommended psu for Intel Arc A750 it’s 550w min. Do I must need to my upgrade my PSU to 550 or above or I’ll be quite ok with my 500w psu???

Pc Spec:
i5 10400F
MB Gigabyte B410M S2 V2
16 GB Ram
240 GB m.2
1TB HDD
*GPU will be Intel Arc A750

Thank you

[MUC]

The processor is specified with 65 W Thermal Design Power (TDP). The 10th generation Comet Lake processors go up to 125 W depending on the model. If your other devices connected to the computer are not power guzzlers either, then I think it is almost impossible that you will get problems with the existing 500 W power supply.