Graphics
Intel® graphics drivers and software, compatibility, troubleshooting, performance, and optimization
Ankündigungen
For support on Altera products please visit the Altera Community Forums.
23466 Diskussionen

b580 显卡无法打开flow3d cast

starsea
Anfänger
2.912Aufrufe

我的电脑打开flow 3d 是 卡在done reading logic tables (驱动Driver 32.0.101.833),当我换回rx5700时,可正常打开

0 Kudos
14 Antworten
JedG_Intel
Moderator
2.851Aufrufe

Hello starsea,

 

Thank you for posting on Intel Community Forum.

 

注意,我只能用英支持你。我用网工具翻条回复,因此可能存在一些不准确的翻

 

To address the issue effectively, please share the information below.

 

1. What version of Flow3D Cast are you using?

2. Is the issue isolated to Flow 3D?

3. Is ReBAR (Resizable BAR) enabled in your BIOS?

4. If possible, kindly share a short video clip demonstrating the issue.

 

Additionally, to have a better understanding of your system configuration and components please generate a complete copy of the System Support Utility (SSU) report. Please follow instructions here and send the report - How to get the Intel® System Support Utility Logs on Windows*

 

I look forward to your response.

 

Best regards

Jed G.

Intel Customer Support Technician


starsea
Anfänger
2.775Aufrufe

你好 Jed G,

我已开启ReRAR

我的问题仅限于flow 3d cast(版本为v5.1 updeta2)

我的问题仅限于flow3d

 

starsea
Anfänger
2.769Aufrufe

以下是我提供的视频文件与ssu 报告

RandyT_Intel
Moderator
2.669Aufrufe

Hello starsea,

 

I'm contacting on behalf of Jed. Thank you for providing this information - please allow me some time to investigate the issue, and I will post an update here once I complete my analysis.

 

Best regards, 

Randy T. 

Intel Customer Support Technician 


JedG_Intel
Moderator
2.580Aufrufe

Hello starsea,

 

Thank you for your patience while we analyze all the information. To further troubleshoot the issue, please follow the outlined steps below.

 

1. Perform clean installation of the latest driver 32.0.101.8331 using DDU

2. Update the BIOS to the latest version 7C35v1R

 

If the issue continuous to persist, please let me know so we can further troubleshoot.

 

Best regards

Jed G.

Intel Customer Support Technician


starsea
Anfänger
2.515Aufrufe
starsea
Anfänger
2.492Aufrufe

我已尝试您的方案,问题任然存在

JedG_Intel
Moderator
2.405Aufrufe

Hello starsea,

 

Thank you for your cooperation. Since the issue continues to persist, I’ll review this matter internally. Additionally, I will attempt to replicate the scenario in our test lab to observe whether we encounter the same behavior. This will help us better understand the root cause and work toward an effective resolution.

 

Best regards

Jed G.

Intel Customer Support Technician


JedG_Intel
Moderator
2.273Aufrufe

Hi starsea,


I'm reaching out to gather additional information. Please see the information below.


  1. complete crash dump of the system
  2.  Test the oldest available driver for comparison 32.0.101.8132.


If you have any questions, please let me know.


Best regards,

Jed G.

Intel Customer Support Technician



starsea
Anfänger
2.187Aufrufe

我已尝试您的方案,但问题任然存在

 

JedG_Intel
Moderator
2.077Aufrufe

Hello starsea,

 

May I know if the same issue is observed when using the older driver available 32.0.101.8132? Please also provide the complete crash dump of the system.

 

If you have any questions, please let me know.

 

Best regards

Jed G.

Intel Customer Support Technician


JedG_Intel
Moderator
1.916Aufrufe

Hi starsea,


I'm following up with regards to the complete crash dump and the result of using the oldest driver available. Please share this information at your earliest convenience so we can investigate further.


Best regards,

Jed G.

Intel Customer Support Technician


JedG_Intel
Moderator
1.823Aufrufe

Hello starsea,

 

I have not heard back from you so I will close this inquiry now. If you need further assistance, please submit a new question as this thread will no longer be monitored.


Best regards,

Jed G.

Intel Customer Support Technician


starsea
Anfänger
1.779Aufrufe

抱歉,我目前没有时间去测试显卡,希望新驱动早日解决问题

Antworten