AAC Encoder parameters needed

[bitsmaker]

Hello,

I am successfully initializing the AACEncoder with the following parameters:

UMC::AudioCodecParams audioCodecParams;

audioCodecParams.m_info_in.channels = 1;

audioCodecParams.m_info_in.sample_frequency = 16000;

audioCodecParams.m_info_out.bitrate = 32000;

audioCodecParams.m_info_out.stream_type = UMC::AAC_MPEG4_STREAM;

audioCodecParams.profile = UMC::AAC_LC_PROFILE;

audioCodecParams.m_pData = spMediaData.get(); // m_pData points to array containing 0x1408

On the decoder side I set the following initialization parameters

UMC::AudioCodecParams audioCodecParams;

audioCodecParams.m_info_in.stream_type = UMC::AAC_MPEG4_STREAM;

audioCodecParams.profile = UMC::AAC_LC_PROFILE;

audioCodecParams.m_pData = spMediaData.get(); // m_pData points to array containing 0x1408

When I call GetFrame on the decoder side I get a result value of UMC_OK

m_spAACDecoder->GetFrame(&m_mediaInputData, &m_mediaOutputDataVec[m_outputIndex]); // returns UMC_OK

However when calling

dataOutSize = m_mediaOutputDataVec[m_outputIndex].GetDataSize();

dataOutSize has a value of 0;

Can someone please help me figure out what the right Encoder parameters are so that I can use the aforementioned AAC Decoder parameters.

I have verified that the AAC decode parameters do work with other sources.

[Chao_Y_Intel]

Hello,

You may help to provide some runable to code to have some further check? For the encoder output, what is size of the output? is it only has 2 byte, '0x1408'? This looks like audio header, anther then the real audio frame data.

Thanks,
Chao

[bitsmaker]

Thanks but If figured out my answer.