Intel® MPI Library
Get help with building, analyzing, optimizing, and scaling high-performance computing (HPC) applications.
2224 Discussions

PCI NVME controller i getting down

senthur_jr
Beginner
1,779 Views

Starting 2 processes
[ 82.914107] nvme nvme0: controller is down; will reset: CSTS=0x3, PCI_STATUS=0x10
[ 82.974347] blk_update_request: I/O error, dev nvme0n1, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
[ 82.985086] blk_update_request: I/O error, dev nvme0n1, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 83.022121] nvme 0000:01:00.0: enabling bus mastering
[ 83.027315] altera-msi f9018080.msi: msi#0 address_hi 0x0 address_lo 0xf9018000
[ 83.034670] nvme 0000:01:00.0: saving config space at offset 0x0 (reading 0x22631d79)
[ 83.042490] nvme 0000:01:00.0: saving config space at offset 0x4 (reading 0x100406)
[ 83.050131] nvme 0000:01:00.0: saving config space at offset 0x8 (reading 0x1080203)
[ 83.057858] nvme 0000:01:00.0: saving config space at offset 0xc (reading 0x0)
[ 83.065066] nvme 0000:01:00.0: saving config space at offset 0x10 (reading 0x4)
[ 83.072360] nvme 0000:01:00.0: saving config space at offset 0x14 (reading 0x0)
[ 83.079656] nvme 0000:01:00.0: saving config space at offset 0x18 (reading 0x0)
[ 83.086954] nvme 0000:01:00.0: saving config space at offset 0x1c (reading 0x0)
[ 83.094251] nvme 0000:01:00.0: saving config space at offset 0x20 (reading 0x0)
[ 83.101546] nvme 0000:01:00.0: saving config space at offset 0x24 (reading 0x0)
[ 83.108841] nvme 0000:01:00.0: saving config space at offset 0x28 (reading 0x0)
[ 83.116134] nvme 0000:01:00.0: saving config space at offset 0x2c (reading 0x22631d79)
[ 83.124035] nvme 0000:01:00.0: saving config space at offset 0x30 (reading 0x0)
[ 83.131330] nvme 0000:01:00.0: saving config space at offset 0x34 (reading 0x40)
[ 83.138716] nvme 0000:01:00.0: saving config space at offset 0x38 (reading 0x0)
[ 83.146024] nvme 0000:01:00.0: saving config space at offset 0x3c (reading 0x12a)
[ 2002 (f=2): [R(2)][-.-%][eta 00m:00s]

0 Kudos
1 Solution
TobiasK
Moderator
1,702 Views

@senthur_jr 
sorry, this is not the correct forum and I have no clue which product you are trying to use. Please open a new thread in an appropriate forum.

View solution in original post

0 Kudos
1 Reply
TobiasK
Moderator
1,703 Views

@senthur_jr 
sorry, this is not the correct forum and I have no clue which product you are trying to use. Please open a new thread in an appropriate forum.

0 Kudos
Reply