如何将R2308WTTYS 的BMC恢复为intel 出厂的状态

[hjian8]

我的R2308WTTYS 更新为定制的BMC logo, 如何才能将BMC 的LOGO恢复为INTEL 出厂时 BMC 为INTEL logo的状态？@

[idata]

Hi Huang,

In regard to your question, how to get the latest BMC default firmware.It is possible to update the latest BMC, BIOS, Management Engine firmware and FRUSDR using our https://downloadcenter.intel.com/ download.intel.com website. We need to open the link and type the model of your system or motherboard.https://downloadcenter.intel.com/download/26921/Intel-Server-Board-S2600WT-BIOS-and-Firmware-Update-for-EFI?product=81822 Intel® Server Board S2600WT BIOS and Firmware Update for EFI version: R01.01.0022Instructions:-Download the firmware update for EFI -Unzip the downloaded file on your computer, not the flash drive -open the extracted folder-copy all the content from the folder to the flash drive and make sure you have the startup.nsh file listed-reboot the system and access EFI by pressing F6 several times during boot -Select EFI shell as the bootable option-If the startup.nsh is listed, the update will start automatically by pressing the space bar. More update details at Read Me (txt) file.Regards,Miguel C

[idata]

Hi Huang,

How to get the latest BMC firmware to default.I was wondering if you have any additional question about how to update and reset BMC firmware; feel free to post again if you need anything else.Regards,Mike C