Intel® Xeon® Processor and Server Products
Intel® Xeon® Processors, Data Center Products including boards, integrated systems, and RAID Storage
5173 讨论

Integrated Intel(R) RAID Controller SROMBSASMP2

idata
员工
4,734 次查看

Hello,

mfi0: 56507 (401357991s/0x0002/info) - Rebuild complete on VD 00/0

mfi0: 56508 (401357991s/0x0002/info) - Rebuild complete on PD 0a(e0xff/s10)

mfi0: 56509 (401357991s/0x0002/info) - State change on PD 0a(e0xff/s10) from REBUILD(14) to ONLINE(18)

mfi0: 56510 (401357991s/0x0001/info) - State change on VD 00/0 from DEGRADED(2) to OPTIMAL(3)

mfi0: 56511 (401357991s/0x0001/info) - VD 00/0 is now OPTIMAL

mfi0: 56512 (401358026s/0x0002/WARN) - Encl PD 00 Path 50001017c6b2ce00 reset (Type 03)

mfi0: 56513 (401358080s/0x0002/WARN) - Encl PD 00 Path 50001017c6b2ce00 reset (Type 03)

mfi0: 56514 (401358134s/0x0002/WARN) - Encl PD 00 Path 50001017c6b2ce00 reset (Type 03)

mfi0: 56515 (401358188s/0x0002/WARN) - Encl PD 00 Path 50001017c6b2ce00 reset (Type 03)

mfi0: 56516 (401358348s/0x0002/WARN) - Encl PD 00 Path 50001017c6b2ce00 reset (Type 03)ter

i get this warning after i changed my broken hard drive on runing system with hot spare. Can anyone help me with this?

0 项奖励
12 回复数
idata
员工
3,218 次查看

Simis, What is it exactly you need help with? Regards, John

0 项奖励
idata
员工
3,218 次查看

i can't find any information about this warning :

mfi0: 56515 (401358188s/0x0002/WARN) - Encl PD 00 Path 50001017c6b2ce00 reset (Type 03)

0 项奖励
idata
员工
3,218 次查看

Simis,

If I'm reading that right, physical disk 0 in enclosure 0 requires reset command and the controller is predicting a failure.

Jason

0 项奖励
idata
员工
3,218 次查看

But how can i fix it? because when i try to find it, i cant see any enclosure 0 or physical disk 0

mfiutil show config

mfi0 Configuration: 2 arrays, 1 volumes, 0 spares

array 0 of 2 drives:

drive 1 ( 279G) ONLINE SAS slot 1

drive 2 ( 279G) ONLINE SAS slot 2

array 1 of 2 drives:

drive 9 ( 279G) ONLINE SAS slot 9

drive 4 ( 279G) ONLINE SAS slot 4

volume mfid0 (557G) RAID-1 256K OPTIMAL spans:

array 0

array 1

0 项奖励
idata
员工
3,218 次查看

What server system are you using? I would guess that it in this case you are looking for the disk in slot 1.

0 项奖励
idata
员工
3,218 次查看

Jason,

My server system is Intel® Server System SR2600URLXR , OS FreeBSD .

i tried to change all physical disks but it will not change anything,

 

57672 (Thu Sep 20 08:25:24 EEST 2012/DRIVE/WARN) - Encl PD 00 Path 50001017c6b2ce00 reset (Type 03)

my config:

mfiutil show config

mfi0 Configuration: 2 arrays, 1 volumes, 0 spares

array 0 of 2 drives:

drive 10 ( 279G) ONLINE SAS slot 10

drive 2 ( 279G) ONLINE SAS slot 2

array 1 of 2 drives:

drive 9 ( 279G) ONLINE SAS slot 9

drive 4 ( 279G) ONLINE SAS slot 4

volume mfid0 (557G) RAID-1 256K OPTIMAL spans:

array 0

array 1

physical drives:

mfiutil show drives

mfi0 Physical Drives:

( 279G) ONLINE SAS slot 2

( 279G) ONLINE SAS slot 4

( 279G) ONLINE SAS slot 9

( 279G) ONLINE SAS slot 10

0 项奖励
idata
员工
3,218 次查看

Hmm... just out of curiousity, which drivers are you using for the controller?

I'm no BSD guru, but I notice there's no BSD drivers on the product download page for that server board.

0 项奖励
idata
员工
3,218 次查看
0 项奖励
idata
员工
3,218 次查看

That driver supports LSI MegaRAID SAS 8408E and LSI MegaRAID SAS 8480E but the http://download.intel.com/support/motherboards/server/s5520ur/sb/e45274011_sr2600ur_tps_r1_9.pdf TPS (section 6.4.2) for that board quotes LSISAS1078. You might have a driver compatablity issue.

0 项奖励
idata
员工
3,218 次查看

To expand on what Jason indicartes above. The difference between the LSI 8408E and 8480E controllers is just internal and external connectors. The LSI MegaRAID SAS 8408E/ 8480E controllers use the LSISAS 1068/1068E ROC.

Here's the LSI MegaRAID SAS 8408E/ 8480E controller http://www.lsi.com/downloads/Public/Obsolete/Obsolete%20Common%20Files/mr_sas_stor_ug.pdf User's Guide.

John

0 项奖励
idata
员工
3,218 次查看

John,

I've poked around a bit on the Intel support site and I've not found any details about the SROMBSASMP2, can you point to a product landing page for that item? Or can you answer, does it use the LSISAS1078 as indicated in the TPS?

0 项奖励
idata
员工
3,218 次查看

Yes, the SROMBSASMP2 or FALSASMP2 use the LSI1078 ROC. John

0 项奖励
回复