S5000PAL

[OSEN]

We have a S5000PAL board and we are getting red light on the front of the server. I looked at SEL (using ipmitool)

BIOS: Version: S5000.86B.12.00.0098.062320091136

110c | 08/06/2010 | 23:48:53 | Voltage BB +1.1V Vtt | Upper Non-critical going high | Reading 1.19 > Threshold 1.18 Volts

1120 | 08/06/2010 | 23:48:54 | Voltage BB +1.1V Vtt | Upper Non-critical going high | Reading 1.10 > Threshold 1.18 Volts1134 | 08/08/2010 | 18:12:23 | Voltage BB +1.1V Vtt | Upper Non-critical going high | Reading 1.39 > Threshold 1.18 Volts1148 | 08/08/2010 | 18:12:23 | Voltage BB +1.1V Vtt | Upper Critical going high | Reading 1.39 > Threshold 1.21 Volts115c | 08/08/2010 | 18:12:24 | Voltage BB +1.1V Vtt | Upper Non-critical going high | Reading 1.10 > Threshold 1.18 Volts1170 | 08/08/2010 | 18:12:24 | Voltage BB +1.1V Vtt | Upper Critical going high | Reading 1.10 > Threshold 1.21 Volts1184 | 09/04/2010 | 10:18:29 | Voltage BB +1.1V Vtt | Upper Non-critical going high | Reading 1.39 > Threshold 1.18 Volts1198 | 09/04/2010 | 10:18:29 | Voltage BB +1.1V Vtt | Upper Critical going high | Reading 1.39 > Threshold 1.21 Volts11ac | 09/04/2010 | 10:18:30 | Voltage BB +1.1V Vtt | Upper Non-critical going high | Reading 1.10 > Threshold 1.18 Volts11c0 | 09/04/2010 | 10:18:30 | Voltage BB +1.1V Vtt | Upper Critical going high | Reading 1.10 > Threshold 1.21 Volts

How should I interpret these lines? and what is Voltage BB +1.1V Vtt anyway?

SDR records:

ipmitool sdr elist

BB +1.1V Vtt | 10h | ok | 7.1 | 1.10 VoltsBB +1.5V AUX | 12h | ok | 7.1 | 1.47 VoltsBB +1.5V | 13h | ok | 7.1 | 1.48 VoltsBB +1.8V | 14h | ok | 7.1 | 1.80 VoltsBB +3.3V | 15h | ok | 7.1 | 3.30 VoltsBB +3.3V STB | 16h | ok | 7.1 | 3.35 VoltsBB +1.5V ESB | 17h | ok | 7.1 | 1.51 VoltsBB +5V | 18h | ok | 7.1 | 5.02 VoltsBB +12V AUX | 1Ah | ok | 7.1 | 11.90 VoltsBB +0.9V | 1Bh | ok | 7.1 | 0.91 VoltsServerboard Temp | 30h | ok | 7.1 | 32 degrees CCtrl Panel Temp | 32h | ok | 12.1 | 23 degrees CFan 1A | 50h | ok | 29.1 | 9918 RPMFan 2A | 51h | ok | 29.2 | 9106 RPMFan 3A | 52h | ok | 29.1 | 10092 RPMFan 4A | 53h | ok | 29.2 | 10208 RPMFan 5A | 54h | ok | 29.1 | 9048 RPMFan 1B | 56h | ok | 29.1 | 14060 RPMFan 2B | 57h | ok | 29.2 | 14134 RPMFan 3B | 58h | ok | 29.1 | 14060 RPMFan 4B | 59h | ok | 29.2 | 14282 RPMFan 5B | 5Ah | ok | 29.2 | 13764 RPMPS1 AC Current | 78h | ok | 10.1 | 0.62 AmpsPS2 AC Current | 79h | ok | 10.2 | 0.62 AmpsPS1 +12V Current | 7Ah | ok | 10.1 | 9.50 AmpsPS2 +12V Current | 7Bh | ok | 10.2 | 10 AmpsPS1 +12V Power | 7Ch | ok | 10.1 | 112 WattsPS2 +12V Power | 7Dh | ok | 10.2 | 120 Watts

[Daniel_O_Intel]

That's the onboard CMOS battery. They're not covered by warranty, but they're pretty easy to find and cheap to replace.