Upgrading FW for AXX6DRV3GEXP 6-bay w/o an Intel Server Chassis

[idata]

I have several of these that need a FW update to bypass an issue. How can I do this w/o an Intel chassis?

Thanks

[KAMALANATH_N_Intel]

At worst case, select the "other Chassis type" while updating the FRUSDR .

Still i would recommend you to check the compatibility and supported chassis.

http://ark.intel.com/ http://ark.intel.com/

[idata]

Hello,

Which board are you using?

Long time ago, i made a /docs/DOC-3013 document on how to update the firmware. Refer to it and let us know if you have any questions.

All the best,

Kind Regards,

Aryan.

[idata]

Hi Guys,

Thanks very much for the quick responses! I was using an HP and whitebox mobo (two systems with these cages in them) but I just realized I have an Intel SE7525RP2 inside an SC5275E chassis on the bench that does have the HSBP connector on the mobo. I assume the firmware only be upgraded through this port. While the chassis doesn't physically fit the cage, I can access the port from this motherboard possibly?

The ark page doesnt return results for the AXX6DRV3GEXP or the SE7525RP2.

I have a dos bootable cdrom with the firmware files copied to it ready to go if it would work with "Other" chassis type?

Thanks again!

[Daniel_O_Intel]

Given the two big warnings posted at

http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18308&lang=eng

regarding *not* using earlier motherboards to do the update, I don't think I'd feel comfortable using an SE7525RP2, which is even older than the 5000 series.