- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am trying to execute the FPGA_tutorial__Compile_Flow. I have followed the instructions to install OneAPI Base Toolkit and the Intel-FPGA Add-on for Base Kit in a Linux Environment with Ubuntu 18.04. I don't have the acceleration card installed but I have executed the aocl install (with an error in the final step because the HW is not present). I can generate the project using Eclipse but when I execute the application using the FPGA_EMULATOR it generates a "core dumped".
Debugging the application in Eclipse the error is raised in the execution of the call to deviceQueue.reset
try {
--> deviceQueue.reset( new queue(device_selector, async_handler{}) );
}
Any advice of what could be the problem?
Can I run this example with the FPGA EMULATOR without the hardware installed?
When I compile the example for CPU (make compile_flow.cpu_host) I also get a "core dumped"
- Tags:
- Bug
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Mariano,
Yes, you can run with FPGA Emulator. we tried to reproduce the same issue on ubuntu 18.04 and oneAPI base kit version 2021.1-beta02, and it is working fine for both FPGA Emulator and CPU without any “core dumped”.
Can you provide details about oneAPI toolkit version that you are using, so that we can investigate more on it?
Goutham
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Goutham:
Thanks you for your help.
Bellow are the steps followed to install the software and generate the examples.
Hope this helps to find the problem.
Regards, Mariano Ruiz
Universidad Politecnica de Madrid
Steps followed.
Software Installation
1.- l_BaseKit_b_2021.1.2.047_offline
gedit silent.cfg
sudo ./install.sh --silent ./silent.cfg
cd /opt/intel/inteloneapi/
source setvars.sh
aocl install
2.- l_intel_fpga_dpcpp_2021.1-beta01/
sudo ./setup.sh
gedit silent.cfg
sudo ./install.sh --silent ./silent.cfg
$INTELFPGAOCLSDKROOT/fpga_sys_check.sh
test of the application
Open a terminal command
1./ Setting the environment variables
mruiz@mruiz-Precision-Tower-3420:~$ source /opt/intel/inteloneapi/setvars.sh
:: initializing environment ...
advisor -- latest
Copyright (C) 2009-2019 Intel Corporation. All rights reserved.
Intel(R) Advisor 2021.1 (build 603889)
ccl -- latest
compiler -- latest
daal -- latest
debugger -- latestI attach you a document describing
dev-utilities -- latest
dnnl -- latest
dpcpp-ct -- latest
intelfpgadpcpp -- latest
intelpython -- latest
ipp -- latest
mkl -- latest
mpi -- latest
tbb -- latest
vpl -- latest
Configuring enviroment for VPL...
Adding /opt/intel/inteloneapi/vpl/latest/include to CPATH...
Adding /opt/intel/inteloneapi/vpl/latest/lib to LIBRARY_PATH and LD_LIBRARY_PATH...
Setting VPL_EXTENSIONS_PATH to /opt/intel/inteloneapi/vpl/latest/lib
vtune -- latest
Copyright (C) 2009-2019 Intel Corporation. All rights reserved.
Intel(R) VTune(TM) Profiler 2021.1-beta02 (build 604121)
:: oneAPI environment initialized ::
mruiz@mruiz-Precision-Tower-3420:~$
2.- verifying
mruiz@mruiz-Precision-Tower-3420:/opt/intel/inteloneapi$ ./sys_check.sh -v
Checking system, will report any issues. Pass in the -v flag for verbose output
: advisor -- latest
: ccl -- latest
component directory /opt/intel/inteloneapi/ccl/latest does not have a syscheck.sh file
: compiler -- latest
Warning: Intel OPAE driver was not found.
If Intel?? Programmable Acceleration Card with Intel?? Arria??GX FPGA is
installed in the system, please install Intel?? OPAE driver by running:
aocl install
: conda_channel -- latest
component directory /opt/intel/inteloneapi/conda_channel/latest does not have a syscheck.sh file
: daal -- latest
component directory /opt/intel/inteloneapi/daal/latest does not have a syscheck.sh file
: debugger -- latest
component directory /opt/intel/inteloneapi/debugger/latest does not have a syscheck.sh file
: dev-utilities -- latest
OK
: dnnl -- latest
component directory /opt/intel/inteloneapi/dnnl/latest does not have a syscheck.sh file
: dpcpp-ct -- latest
OK
: etc -- latest
component directory /opt/intel/inteloneapi/etc/latest does not have a syscheck.sh file
: intelfpgadpcpp -- latest
: intelpython -- latest
...None
======================================================================
ERROR: test_smoke (__main__.TestIntelDistribution) (package='cython')
----------------------------------------------------------------------
Traceback (most recent call last):
File "/opt/intel/inteloneapi/intelpython/python3.7/sys_check/sys_check.py", line 80, in test_smoke
raise err
File "/opt/intel/inteloneapi/intelpython/python3.7/sys_check/sys_check.py", line 77, in test_smoke
stderr=subprocess.DEVNULL)
File "/opt/intel/inteloneapi/intelpython/latest/lib/python3.7/subprocess.py", line 487, in run
output=stdout, stderr=stderr)
subprocess.CalledProcessError: Command 'python "/opt/intel/inteloneapi/intelpython/latest/pkgs/cython-0.29.13-py37ha68da19_0/info/test/run_test.py"' returned non-zero exit status 1.
----------------------------------------------------------------------
Ran 4 tests in 8.195s
FAILED (errors=1)
Failed
: ipp -- latest
component directory /opt/intel/inteloneapi/ipp/latest does not have a syscheck.sh file
: licensing -- latest
component directory /opt/intel/inteloneapi/licensing/latest does not have a syscheck.sh file
: mkl -- latest
component directory /opt/intel/inteloneapi/mkl/latest does not have a syscheck.sh file
: mpi -- latest
component directory /opt/intel/inteloneapi/mpi/latest does not have a syscheck.sh file
: pset -- latest
component directory /opt/intel/inteloneapi/pset/latest does not have a syscheck.sh file
: tbb -- latest
: vpl -- latest
VPL was found: /opt/intel/inteloneapi/vpl/latest
No issues encountered.
: vtune -- latest
OS version supported.
dpkg package found.
Found GTK3 package.
Found libXScrnSaver package.
Found libnss3 library: version=2:3.35.
Corrected libnss3 version=3.35.
Found asound library.
Found Xorg server package.
Found pango library.
Completed checking GUI prerequisites for oneAPI VTune(TM) Profiler.
Version of kernel is correct
Found correct kernel headers
Found libc6 library: version=2.27.
glibc library version is correct.
No Issues Encountered
mruiz@mruiz-Precision-Tower-3420:/opt/intel/inteloneapi$
I get the error becuase the hardware is not present.
3.-running eclipse in the same terminal window
./Downloads/eclipse-cpp-2019-03-R-linux-gtk-x86_64/eclipse/eclipse &
4.-Creating a empty workspace /home/mruiz/testoneapi
a. File->New->Browse Intel samples
b. Select. Intel oneAPI Base Toolkit->DPC++ Compiler-|FPGA tutorail: Compile Flow
c. Select Finish. Project created correclty
d. In the project. Build Configurations-> Create FPGA Build Configs. A window apperas. Clickon OK for the default emulation mode.
e. Set Active. Already activated the FPGA emulation.
f. Project Build. The console does not display any error.
compile_flow.fpga_emu is generated in the build/FPGA_emulator_debug. Debugging: Crashes
Output of Eclipse stack.
compile_flow.fpga_emu [C/C++ Application]
compile_flow.fpga_emu [7368] [cores: 3]
Thread #1 [compile_flow.fp] 7368 [core: 3] (Suspended : Signal : SIGSEGV:Segmentation fault)
acl_hal_mmd_get_device_memory_support() at 0x7fffefecb2f0
acl_svm_device_supports_physical_memory() at 0x7fffefea052f
l_finalize_context() at 0x7fffefee8ca5
clCreateContextIntelFPGA() at 0x7fffefee905e
clGetDeviceInfoIntelFPGA() at 0x7fffefea0cc1
cl::sycl::detail::platform_impl_pi::get_devices(cl::sycl::info::device_type) const at 0x7ffff7f6e6b4
cl::sycl::platform::get_devices(cl::sycl::info::device_type) const at 0x7ffff7f9d06d
cl::sycl::detail::platform_impl_pi::get_platforms() at 0x7ffff7f6d61c
cl::sycl::platform::get_platforms() at 0x7ffff7f9d0a4
cl::sycl::device::get_devices() at 0x7ffff7f989c6
cl::sycl::device_selector::select_device() const at 0x7ffff7f99747
cl::sycl::queue::queue() at queue.hpp:41 0x4285a4
main() at compile_flow.cpp:48 0x426bc2
gdb (8.1.0.20180409)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Thanks for the details. We will investigate and get back to you as soon as possible.
Goutham
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
This FPGA issue needs a FPGA expert to look at and can not be handled here. Please report your issue to the Intel® High Level Design Forum.
Thank you!
Jennifer
![](/skins/images/872293744008A34B36F8ABF94A46CC66/responsive_peak/images/icon_anonymous_message.png)
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page