Intel AMT and VLAN Configuration

[RWalt4]

Is it possible to configure a VLAN for the Intel AMT Network Interface?

I'm using the Intel Manageability Commander Version 1.0.8 and AMT Version 11.7.0

Thanks

[idata · Accepted solution]

Hello fernwalter,

Thanks for joining the community.Let me tell you that VLAN was only supported in AMT 3.0 and 5.0. After that it has been not supported any more. We will do some research to find out if it will be supported again in future releases.We will let you know when we have updates.RegardsJose H.

[idata]

Hello fernwalter,

Do you have any updates, questions or comments in regards to this issue?Please do not hesitate to contact us back.If you consider the issue to be completed please let us know so we can proceed to mark this thread as resolved.RegardsJose A.

[idata]

Hello fernwalter,

We will proceed to mark this thread as resolved. If you have further issues or questions just go ahead and create a new topic.Jose A.

[idata]

Hello all,

We will proceed to mark this thread as resolved. If you have further issues or questions just go ahead and create a new topic.Jose A.

[Dariusz_W_Intel]

Hello fernwalter,

Jose meant Tagged VLAN support that was removed - see https://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide/default.htm?turl=WordDocuments/deprecatedanddeletedfeatures.htm Intel(R) AMT SDK Implementation and Reference Guide

If your network uses 802.1x/Radius for devices authentication to network you can configure it in 802.1x section of AMT profile using ACUWizard (for Host Based Configuration) or SCS Console for Remote Configuration - please check Intel SCS user guide for details - http://www.intel.com/go/scs www.intel.com/go/scs .

rgds

Dariusz Wittek

Intel EMEA Biz Client Technical Sales Specialist