Mechanical Dimensions and position of tripod mount of D415.

[RMadh2]

Mounting Mechanism: One 1/4-20 UNC thread mounting point

I am unable to find the specifications for this in the mechanical drawing with the dimensions and position in the Datasheets. Where can I find this information?

[MartyG]

I was not able to find useful information about the 1/4 thread's dimensions on the mechanical drawing either. A review article of the camera said though that it was a standard 1/4 thread, so maybe you could get dimensions by googling for details of that thread type.

The article's photo galleries have images of the camera attached to the tripod.

http://www.tomshardware.co.uk/intel-realsense-d400-depth-cameras,news-57762.html RealSense D400-Series Depth Cameras Are For Devs, Not Consumers (Hands On)

[MartyG]

Another course of investigation for you would be to check the CAD models for the 400 Series cameras that have been released.

https://www.intel.com/content/www/us/en/support/articles/000026841/emerging-technologies/intel-realsense-technology.html Intel® RealSense™ D400 Series Production CAD Files

[RMadh2]

MartyG, you are THE MAN. Thanks again xD

[MartyG]

You're welcome, I'm glad I could be of help. Good luck!

[idata]

Hello rakshith,

MartyG is right, the information you are looking for can be found on the link that Marty shared. Inside of the Intel® RealSense™ Camera D415 file. Best Regards, Juan N.