Items with no label
Announcements
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
3338 Discussions

USB-A Compatibility with USB-C interface?

InfinityMech
Beginner
‎06-08-2019 11:48 PM
1,168 Views
Solved Jump to solution

I'm thinking about using a Intel RealSense scanning solution utilizing multiple RealSense cameras, however, most devices only carry a limited number (1) of USB-C interfaces. Strangely enough, I'm unable to find USB-C to USB-C hubs for more ports.

 

Are the cameras compatible with a USB-C to USB-A cable?

0 Kudos
1 Solution
MartyG
Honored Contributor III
‎06-09-2019 10:00 AM
840 Views
Solved Jump to solution

The cable supplied with the camera is a USB-A to Type-C cable (full size USB connector on the end that connects to the computing hardware or USB hub), and Type-C micro connector (on the end that plugs into the side of the camera). So you should not have any trouble finding a USB 3 hub to attach the multiple cameras to.

 

1.png

 

 

 

It is also possible to connect the camera to a micro-size 'USB OTG' port on a mobile device or single-board computer (like the Up Board example shown below) with a full size USB-A connector by using an adaptor.

 

2.png

View solution in original post

Copy link

Link Copied

3 Replies
MartyG
Honored Contributor III
‎06-09-2019 10:00 AM
841 Views
Solved Jump to solution

The cable supplied with the camera is a USB-A to Type-C cable (full size USB connector on the end that connects to the computing hardware or USB hub), and Type-C micro connector (on the end that plugs into the side of the camera). So you should not have any trouble finding a USB 3 hub to attach the multiple cameras to.

 

1.png

 

 

 

It is also possible to connect the camera to a micro-size 'USB OTG' port on a mobile device or single-board computer (like the Up Board example shown below) with a full size USB-A connector by using an adaptor.

 

2.png

Copy link
InfinityMech
Beginner
‎06-09-2019 08:16 PM
840 Views
Solved Jump to solution

This is perfect! I panicked when I saw the USB-C interface. Thank you!

0 Kudos
Copy link
MartyG
Honored Contributor III
‎06-09-2019 08:50 PM
840 Views
Solved Jump to solution

I'm very glad I could help. Please feel welcome to return to this forum any time that you have further questions. Good luck! :)​

0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.