How to use Intel ATOM E3845 GPIO Pinctrl in linux

[PSui1]

My board used E3845 and I wanted to use some GPIO Pin to do something important.

I download the linux-stable kernel as the document tizen-ivi-m2-kernel-ltsi-linux-support-package-atom-e3800-gsg.pdf described. Made and updated the linux kernel.

There is the information when the system started and printed:

io scheduler cfq registered (default)

gpiochip_find_base: found new base at 154

gpiochip_add: registered GPIOs 154 to 255 on device: byt_gpio.0

gpiochip_find_base: found new base at 126

gpiochip_add: registered GPIOs 126 to 153 on device: byt_gpio.1

gpiochip_find_base: found new base at 82

gpiochip_add: registered GPIOs 82 to 125 on device: byt_gpio.2

byt_gpio byt_gpio.2: GPIO interrupt error, pins misconfigured

byt_gpio byt_gpio.2: Gpio 27 interrupt flood, disabling

[root@localhost ~]# cd /sys/class/gpio/

[root@localhost gpio]# ls -l

total 0

--w-------. 1 root root 4096 Jul 3 16:21 export

lrwxrwxrwx. 1 root root 0 Jul 3 16:21 gpiochip126 -> ../../devices/platform/byt_gpio.1/gpio/gpiochip126

lrwxrwxrwx. 1 root root 0 Jul 3 16:21 gpiochip154 -> ../../devices/platform/byt_gpio.0/gpio/gpiochip154

lrwxrwxrwx. 1 root root 0 Jul 3 16:21 gpiochip82 -> ../../devices/platform/byt_gpio.2/gpio/gpiochip82

--w-------. 1 root root 4096 Jul 3 16:21 unexport

[root@localhost usb]# uname -a

Linux localhost.localdomain 3.10.28-03142014-ltsi+ # 1 SMP Sun Jul 2 21:38:05 PDT 2017 x86_64 x86_64 x86_64 GNU/Linux-----The kernel Information.

I wonder whether I should do some configure work for the BYT Pinctrl for GPIO in the BIOS.

Can you tell me what I should do in the BIOS? And How to use the BYT Pinctrl for GPIO in the linux kernel?

Thank you.

[idata]

Hello suipingli,

Thank you for contacting Intel Communities.I recommend you to open a new thread in the https://embedded.communities.intel.com/community/en Embedded Community.Best Regards,Juan V.