Ethernet for Nios-V on Stratix 10 MX development board

[quan1]

I want to have some kind of network connectivity on the Stratix 10 MX development board other than UART.

There are 2 QSFP+ slots available.

What would I need in platform designer for the Nios to be able to use ethernet?

Please do not suggest example designs, as they do not seem to work on my computer.

I'm just wondering if anyone has actually managed to get something simple like an echo server running and how that might be done.

[EBERLAZARE_I_Intel]

Hi,

For Nios V, are you familiar with IPerf? I know you would not like to see example designs, but you may take a look on how the outputs for these two example if they fit what you trying to achieve:

https://www.intel.com/content/www/us/en/docs/programmable/726952/23-1/operating-the-microc-tcp-ip-iperf.html

Simple socket server:

https://www.intel.com/content/www/us/en/docs/programmable/726952/23-1/operating-the-microc-tcp-ip-simple-socket.html

There are no example designs for Nios V with QSFP.

[EBERLAZARE_I_Intel]

Hi,

Do you have any further questions?

[EBERLAZARE_I_Intel]

Hi,

I hope that your question has been addressed, I now transition this thread to community support. If you have a new question, Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.

p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.