"TrustZone_Cortex-A9AC6" example does not run normally

[Mohammed_Lami]

Hi, I am struggling in running the ready-examples of the ARM development studio IDE. I demonstrate the "TrustZone_Cortex-A9AC6" example here.

I am using the following resources:

1) "ARM Cyclone V SoC FPGA development kit".

2) Licensed copy of the ARM development studio IDE version 2021.1.

3) Windows 10 OS.

4) JTAG connection between the FPGA kit and the PC.

Please also refer to the snapshots in the attached pdf file for more details.

According to the description provided with this example "readme.html", the system should display some text on the "Target Console" like "Hello from Normal world" and so on. However, nothing was displayed on the Target Console although the system was running without a clear reason.

Any advice please to handle this issue? thanks a lot.

[JingyangTeh]

Hi

Since there are no feedback for this thread, I shall set this thread to close pending. If you still need further assistance, you are welcome reopen this thread within 20days or open a new thread, someone will be right with you.

If you happened to close this thread you might receive a survey. If you think you would rank your support experience less than 10 out of 10, please allow me to correct it before closing or if the problem can’t be corrected, please let me know the cause so that I may improve your future service experience.

Regards

Jingyang, Teh