- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have an Intel RAID RSP3TD160F adapter and UEFI-capable desktop motherboard based on Z390 chipset. Apparently the UEFI BIOS does not provide a setup menu entry for Human Interface Infrastructure. Also it displays "No MegaRAID Adapter Installed" message during POST. Is it possible to use StorCli or any other tools to setup a bootable RAID array for this hardware configuration? Is there a way to run MegaRAID Human Interface Infrastructure Configuration Utility from EFI shell?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The problem has been resolved in three steps:
- Latest BIOS version flashed on the motherboard (MSI MEG Z390 Godlike)
- RAID card profile setting changed from "PD64" to "PCIe4"
- Generic SFF-8643->SFF-8639 cable changed to Broadcom 05-50064-00 due to different pinout on LSI Tri-Mode cards. More info is here: https://www.icydock.com/PDF/MB699VP-B_Tri-mode_compatability_announcement.pdf
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You need to discuss this with the motherboard manufacturer.
Doc
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello alexey.romenskiy,
If you need more assistance please feel free to contact us back.
Best regards,
Sergio S.
Intel Customer Support Technician
Under Contract to Intel Corporation
For firmware updates and troubleshooting tips, visit :https://intel.com/support/serverbios
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The problem has been resolved in three steps:
- Latest BIOS version flashed on the motherboard (MSI MEG Z390 Godlike)
- RAID card profile setting changed from "PD64" to "PCIe4"
- Generic SFF-8643->SFF-8639 cable changed to Broadcom 05-50064-00 due to different pinout on LSI Tri-Mode cards. More info is here: https://www.icydock.com/PDF/MB699VP-B_Tri-mode_compatability_announcement.pdf
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello alexey.romenskiy,
We are glad to hear that you were able to resolve your problem, please let us know if you need more assistance or if we can close this thread.
Best regards,
Sergio S.
Intel Customer Support Technician
Under Contract to Intel Corporation
For firmware updates and troubleshooting tips, visit :https://intel.com/support/serverbios
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page