Raid1 MIB intel rapid storage

[jmich11]

hello

it is possible to recover the status of raid1 (hardware) with a mib ?

i would like use PRTG to send a mail when a problem on the raid1 is detected (intel rapid storage is very bad for send mail with smtp)

thanks

[idata]

Hello jeuxpcagogo15:

In order to better assist you we were doing a research about this matter, but before we continue with it, we just wanted to confirm with you what is a mib? Among the results we got, some of them say that it is an adapter, so we just wanted to check if it is a hardware or software component and if you have a link where we can get the specifications? Also, what is the model of your motherboard or laptop? Please let me know if you are using a hardware or software RAID controller. Which Windows version are you using? Any further questions, please let me know. Regards Alberto

[idata]

Hello:

I just wanted to check if you saw the information we are requesting on the previous thread, and if you need further assistance on this matter? Any questions, please let me know. Regards Alberto

[jmich11]

hello

i have :

-Windows server 2012 datacenter r2,

-motherboard : GIGABYTE GA-Z170N-WIFI (rev 1001)

-2 SSD : kingston 240gb

-raid1 (hardware)

intel rapid storage send mail without "smtp authentification" it's crasy in 2017 !

thanks

[idata]

Hello jeuxpcagogo15:

Thank you very much for providing that information, we really appreciate that. Besides that, we just wanted to make sure what do you mean with MIB? Any questions, please let me know. Regards Alberto

[idata]

Hello jeuxpcagogo15:

I just wanted to check if you saw the information we are requesting on the previous post, and if you need further assistance on this matter? Any questions, please let me know. Regards Alberto