no create raid volume on prime z590-v motherboard

[aurimas]

Hello,

I have 2 NVMe storages installed on asus z590-v motherboard. I open UEFI BIOS Utility, open Advanced Mode (Advanced) -> PCH Storage Configuration -> set SATA Mode selection to RAID and M.2_2 PCIE Storage RAID support to RST Controlled. Save and restart BIOS.
After restart, on the Storage Information view I see NVME: M.2_1 (CT500P5SSD8), RAID: CT1000P5PSSD8 (M.2_2), and Intel Rapid Storage Technology is on.

When open Advanced -> Intel(R) -> Rapid Storage Technology -> no create RAID volume (expected: Create RAID volume selection)

Additional information: OS Type is Windows UEFI mode

I do steps by https://www.asus.com/support/FAQ/1045089/

I am asking to help me to get create RAID volume selection.

Best regard,

Aurimas

[Alberto_R_Intel]

aurimas, Thank you for posting in the Intel® Communities Support.

We will be more than glad to assist you with this matter. 

In regards to the Intel® Rapid Storage Technology, in the link below you will find the user guide of the tool for you to be able to create the RAID volume that you prefer:

https://www.intel.com/content/dam/support/us/en/documents/chipsets/imsm/sb/irst_user_guide.pdf

For this scenario, it is important to mention that everything related to the BIOS settings and configuration will be supported by ASUS. Based on that we recommend to get in contact directly with them for further assistance on this topic:

https://www.asus.com/support/

Additionally, we recommend to install the RST version tested and validated by ASUS:

https://dlcdnets.asus.com/pub/ASUS/mb/05SATA/DRV_RST_Intel_TSD_SZ_W11_64_V18611016_20211020R.zip?model=PRIME%20Z590-V

Any questions, please let me know.

Regards,

Albert R.

Intel Customer Support Technician

[Alberto_R_Intel]

Hello aurimas, I just wanted to check if the information posted previously was useful for you and if you need further assistance on this matter?

Regards,

Albert R.

Intel Customer Support Technician

[Andres_Intel]

Hello aurimas,

We have not heard back from you, so we will close this thread. If you need any additional information, please submit a new question as this thread will no longer be monitored.

Best regards, 

Andres P.  

Intel Customer Support Technician