- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi all, I've been looking around on the intel site for a few hours now, trying to find a technical specification for the matrix storage manager metadata fields in the latest ICH10R controllers.
I own one of these, and run Linux. Previous versions seem to have had their signature and metadata located at 1K(two sectors) back from the end of the disk; mine has metadata, apparently correctly formatted such that the current dmraid code understand it [my volumes mount - thats a good start], but set back 2115 sectors from the end of the disk.
So I'm writing an update to the isw ataraid driver in dmraid, and while I have figured out enough by simple inspection of whats on the disk, to get it going - it would be great to have an actual specification so that I can make it as robust and correct for other people as possible.
This bug report https://bugs.edge.launchpad.net/ubuntu/+source/dmraid/+bug/372170 contains more detailed data if anyone cares to look :). But my primary interest is to find some specs on the hardware I have :).
Thanks in advance,
Rob
I own one of these, and run Linux. Previous versions seem to have had their signature and metadata located at 1K(two sectors) back from the end of the disk; mine has metadata, apparently correctly formatted such that the current dmraid code understand it [my volumes mount - thats a good start], but set back 2115 sectors from the end of the disk.
So I'm writing an update to the isw ataraid driver in dmraid, and while I have figured out enough by simple inspection of whats on the disk, to get it going - it would be great to have an actual specification so that I can make it as robust and correct for other people as possible.
This bug report https://bugs.edge.launchpad.net/ubuntu/+source/dmraid/+bug/372170 contains more detailed data if anyone cares to look :). But my primary interest is to find some specs on the hardware I have :).
Thanks in advance,
Rob
Link Copied
4 Replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello, this is a hardware question that I will submit for you at http://supportmail.intel.com/scripts-emf/welcome.aspx. You should receive a response from the hardware team within 48 hours.
-Gina
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks!
-Rob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
For tech specs, you might also check http://ark.intel.com/.
The team in charge of the hardware designer corner of intel.com can be reached through: http://developer.intel.com/design/sitehelp/
For HW design support, you would need to work through eitheryour company's Intel rep ora Field Application Engineer at an Intel Authorized Distributor in your area.
==
Lexi S.
Intel Software Network Support
http://www.intel.com/software
email: ISN.support@intel.com
Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.
The team in charge of the hardware designer corner of intel.com can be reached through: http://developer.intel.com/design/sitehelp/
For HW design support, you would need to work through eitheryour company's Intel rep ora Field Application Engineer at an Intel Authorized Distributor in your area.
==
Lexi S.
Intel Software Network Support
http://www.intel.com/software
email: ISN.support@intel.com
Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Quoting - lifeless
Hi all, I've been looking around on the intel site for a few hours now, trying to find a technical specification for the matrix storage manager metadata fields in the latest ICH10R controllers.
I own one of these, and run Linux. Previous versions seem to have had their signature and metadata located at 1K(two sectors) back from the end of the disk; mine has metadata, apparently correctly formatted such that the current dmraid code understand it [my volumes mount - thats a good start], but set back 2115 sectors from the end of the disk.
So I'm writing an update to the isw ataraid driver in dmraid, and while I have figured out enough by simple inspection of whats on the disk, to get it going - it would be great to have an actual specification so that I can make it as robust and correct for other people as possible.
This bug report https://bugs.edge.launchpad.net/ubuntu/+source/dmraid/+bug/372170 contains more detailed data if anyone cares to look :). But my primary interest is to find some specs on the hardware I have :).
Thanks in advance,
Rob
I own one of these, and run Linux. Previous versions seem to have had their signature and metadata located at 1K(two sectors) back from the end of the disk; mine has metadata, apparently correctly formatted such that the current dmraid code understand it [my volumes mount - thats a good start], but set back 2115 sectors from the end of the disk.
So I'm writing an update to the isw ataraid driver in dmraid, and while I have figured out enough by simple inspection of whats on the disk, to get it going - it would be great to have an actual specification so that I can make it as robust and correct for other people as possible.
This bug report https://bugs.edge.launchpad.net/ubuntu/+source/dmraid/+bug/372170 contains more detailed data if anyone cares to look :). But my primary interest is to find some specs on the hardware I have :).
Thanks in advance,
Rob
Can you send me a copy ,3q
email: qiuting200@gmail.com

Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page