Must-See Sessions & Demos at FPGA Conference Europe 2025!

Join Altera and our Altera Solution Acceleration Partners (ASAP) at FPGA Conference Europe 2025 as we showcase practical, high-impact FPGA solutions advancing AI, robotics, functional safety, and high-performance computing. The conference will take place from July 1st to July 3rd at the NH München Ost Conference Center in Munich, Germany.  

Deepali Trehan, Head of Product Management & Marketing, and Ilya Ganusov, Director of Programmable Architecture, will discuss how Altera FPGAs are driving innovation in robotics and real-time edge AI systems, with real-world examples that demonstrate their powerful capabilities. Their keynote speech, “Learn About Altera’s Strategy and Commitment in the FPGA Market,” is scheduled for Wednesday, July 2nd, from 1:30 PM to 2:00 PM. 

Check out these other sessions hosted by Altera: 

• Intelligent Camera: AI-Infused Image Signal Processing 
  (Tuesday, July 1st from 5:20PM – 6PM) 

• DSP Block Based Soft-Processor Floating Point Unit Design 
  (Wednesday, July 2nd from 12:05AM – 12:45PM) 

• RISC-V FPGA Soft Processor Implementation 
  (Wednesday, July 2nd from 4:30PM – 5:10PM) 

• Introduction to Altera FPGA AI Suite for Altera FPGAs and Altera’s New DSP Block Architecture 
  (Thursday, July 3rd from 9-9:40AM) 

Make sure to also connect with our ASAP partners to explore expert-led technical sessions, live demonstrations, and industry-leading products powered by Altera FPGAs.  

Join our Partners’ Sessions 

Arrow Electronics hosted session:  

• Introduction to the HPS Architecture and Tutorial on How to Build and Run Linux on an Agilex 5 SoC 
  (Wednesday, July 2nd from 11:15AM – 12:55PM)  

• How to Use the Tensor Mode of the DSP Blocks in Altera Agilex 5 FPGAs  

(Thursday, July 3rd from 11AM - 11:40PM) 

• Implementation of MIPI-CSI2 in Altera Agilex 5 FPGAs 
  (Thursday, July 3rd 3:30PM – 4:10PM) 

 Arrow Electronics & ONEWARE hosted session: 

• Ultra-Fast, Customized CNN AI on Any Altera FPGA  
  (Thursday, July 3rd 9:50AM – 10:30AM) 

DynaNIC Semiconductors hosted session:  

• How to Transfer the Shortest Packets at Sustained 400 Gbps over PCIe 
  (Thursday, July 3rd 11:00AM –11:40AM) 

Visit our Partners’ Demos & Exhibitions  

ARIES Embedded GmbH 

ARIES Embedded GmbH will showcase its Altera-based System-on-Module (SoM) portfolio, including the MCV SoM (Cyclone® V SoC FPGA), MCXL SoM (Cyclone® 10 LP FPGA), MX10 SoM (MAX® 10 FPGA), and SpiderSoM (MAX® 10 FPGA). These compact, power-efficient modules are designed for a wide range of embedded applications, offering a balance of performance, size, and cost. Aries Embedded’s solutions are ideal for developers seeking flexible, production-ready FPGA platforms. 

DynaNIC Semiconductors 

DynaNIC Semiconductors will run a live demo using Silicom’s ThunderFjord powered by Agilex™ 7 M-Series FPGA, streaming full 400 Gbps traffic to a host system while measuring throughput in real time. Their ready-to-use solution offloads high-speed network processing to FPGA accelerator cards. Using DYNANIC, no FPGA firmware development is required, and non-traditional FPGA users can utilize the familiar DPDK stack. 

El Camino GmbH 

El Camino GmbH will present an AI Sketch Recognition demo using an Agilex™ 7 FPGA as a real-time AI accelerator. The system processes an HDMI video stream using the Intel/Altera FPGA Video and Vision Processing IP Suite for demultiplexing, scaling, and buffering, then performs inference using the Altera FPGA AI Suite. Results are streamed to the cloud via Ethernet. This scalable architecture supports a wide range of edge AI applications, from lightweight DNNs to compute-intensive workloads, and can be implemented across various Altera FPGA families. 

Enclustra GmbH 

Enclustra GmbH will exhibit its  Andromeda IAE50 SoM powered by an Agilex™ 5 FPGA. The IAE50 SoM integrates high-speed LPDDR5 memory, dual Gigabit Ethernet, USB 3.1, and a range of I/O options, making it ideal for demanding embedded applications. The SoM targets vision, test and measurement, and security and communication systems.  

Sensor to Image 

Sensor to Image, a subsidiary of Euresys, is showcasing its new GigE Vision 3.0 IP core, implemented on the Altera Agilex™ 5 E-Series 065B Premium Development Kit. This compact and customizable IP core supports data rates of 10 Gbps and beyond, using the RoCEv2 RDMA protocol and GenDC payload for high-performance streaming. It is compatible with a range of Altera FPGAs, from Cyclone® 10 FPGA to the latest Agilex™ devices, and is delivered as a working reference design to accelerate development.  

HDL Works 

HDL Works will demonstrate their IO Checker and Board Trace tools live on a MAX® 10 FPGA. These tools verify FPGA pin placements by comparing the Quartus-generated pin list with board schematics. The built-in rule generator allows users to validate large groups of signals, even when signal names differ, completing the entire verification process in under 10 minutes. These tools support all Altera FPGA families and streamline board-level design verification. 

iWave Global 

iWave Global will showcase its extensive FPGA portfolio featuring Agilex, Stratix 10, and Arria 10 SoC FPGAs. Their offerings include production-ready SoMs, SmartNICs, and 3U VPX solutions designed for a wide range of applications. With support for Agilex 3, 5, 7, and 9 SoC FPGAs, iWave delivers scalable compute, high-speed connectivity, and robust reliability.  

NewTec GmbH 

NewTec GmbH will present two safety development platforms: the NTSafeFlex Functional Safety Development Kit (FSDK), powered by a Cyclone® V FPGA, and the NTSafeDriveMonitor, powered by a MAX® 10 FPGA. The NTSafeFlex FSDK supports development up to SIL3 and PLe, Cat 4, and includes a comprehensive guide to reduce risk and time to market. The NTSafeDriveMonitor is an add-on safety module that enables existing motor drives to meet functional safety standards, monitoring speed, direction, and position. Both platforms are ideal for industrial automation, robotics, and factory systems. 

PRO DESIGN Electronic GmbH 

PRO DESIGN Electronic GmbH will exhibit its  FALCON Agilex 7M and FALCON Stratix 10 acceleration cards, optimized for next-generation broadcast systems. In partnership with Manifold Technologies, they will demonstrate how these high-performance FPGA cards power the Manifold Cloud, enabling efficient, scalable, and ultra-low-latency media processing in cloud-native broadcast environments. 

Trenz Electronic GmbH 

Trenz Electronic GmbH will showcase its portfolio of Altera-based boards, including its latest AXE5-Eagle Development Board, CYC5000 Module (Cyclone® V), and TEI1000 Module (Stratix® 10) with its supporting baseboard, the TEB1000.  

Xiphera Ltd 

Xiphera Ltd will present its newly finalized versions of quantum-safe asymmetric cryptography operating on iWave’s Agilex™ 5 FPGA-powered iW-RainboW-G58M® SoM. The demo features Xiphera’s xQlave® IP cores implementing Module Lattice (ML) based Key Encapsulation Mechanism (KEM) and Digital Signature and Authentication (DSA) algorithms, showcasing real-time post-quantum security with minimal FPGA resource usage. This live setup highlights the performance, crypto-agility, and integration benefits of deploying PQC directly in hardware for future-proof system security.