- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
Hello,
we would like to use the Ethernet-Controller I210-IT in our design and I would like to know what are the voltage limits, threshold values and which communication standard should be used for PECLKp(Pin 26) and PECLKn(Pin 25).
Lien copié
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
Hello MBre,
Thank you for posting in Intel Ethernet Communities.
Since your query involves design/customization with Ethernet-Controller I210-IT, please be informed that this will be best answered by our Embedded Connectivity Support team. We will help you to move this post to the designated team for further assistance.
Please feel free to contact us if you need assistance from Ethernet support team.
Best regards,
Crisselle C.
Intel® Customer Support
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
Thank you very much for your support.
Then I will wait on Embedded Connectivity Support team
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
Hello, @MBre:
Thank you for contacting Intel Embedded Community.
Based on your first communication, could you please let us know the reasons to request this information?
We are waiting for your answer.
Best regards,
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
Hello @CarlosAM_INTEL ,
for a prototype we consider to use this IC as a ethernet controller. This IC has to be synchronized with the other electronics parts therefore we want to feed a clock signal in the I210. At least we need to know the communication standard (LVPECL,LVDS etc).
Best regards
Mirco
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
Hello, @MBre:
Thanks for your reply.
The information that may answer your question is stated in sections 12.1.2 and 11.6.29, on pages 805 and 799 of the document attached to your previous message.
Best regards,
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
Hello @CarlosAM_INTEL ,
thank you very much for your reply. Unfortunately this information doesn't help ne.
I have read both pages and i wanted to clarify my problem, maybe you can confirm this.
I have a 3.3V LVDS driver which will trigger the I210-IT ac coupled. Will this work?
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
Hello, @MBre:
Thanks for your reply.
We sent another email with information that may help you.
Best regards,
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
Hello, @MBre:
Thanks for your update.
We sent another email with information that may help you.
Best regards,
- S'abonner au fil RSS
- Marquer le sujet comme nouveau
- Marquer le sujet comme lu
- Placer ce Sujet en tête de liste pour l'utilisateur actuel
- Marquer
- S'abonner
- Page imprimable