FM10K link issue

[User1581302316066249]

Hello,

I'd like to know FM10K support 100Gbase-LR4.

100Gbase-SR4 is OK, but LR4 is failed.

Thanks in advance,

J. S. Kim

[CarlosAM_INTEL]

Hello, @User15813023160662497570​:

Thank you for contacting Intel Embedded Community.

It is important to clarify that the 100GBase-SR4 mode is mentioned in sections 7.2, 7.7.1, and 12.9.1; on pages 302, 311, and 834 of the Intel(R) Ethernet Switch FM10000 Datasheet document # 333497.  The other mode is unmentioned on the cited document.

This document can be found when you are logged into your Resource & Design Center (RDC) privileged account at the following website:

http://www.intel.com/cd/edesign/library/asmo-na/eng/333497.htm

The RDC Account Support form is the channel to process your account update request. It can be found at:

https://www.intel.com/content/www/us/en/forms/support/my-intel-sign-on-support.html

Best regards,

@Mæcenas_INTEL​.

[User1581302316066249]

Hello, I’ve tested on the Intel reference system (FM10840 + Atom) I just want to know whether FM10K supports 100Gbase-LR4 or not. Thanks, J. S. Kim

[CarlosAM_INTEL]

Hello, @User15813023160662497570​:

Thanks for your reply.

It is important to clarify that the unmentioned information in the documentation of the Intel devices has not been tested or validated with them.

Due to this fact, the cited mode should be tested and validated by your own.

Best regards,

@Mæcenas_INTEL​.