Embedded Connectivity
Intel network controllers, Firmware, and drivers support systems
912 Discussões

How to program I210-AT at ICT HP3070 platform?

WKng
Principiante
5.261 Visualizações

Hi Intel team,

We are using "WGI210AT S LJXR" chipset on our custom board. How to program MAC address on ICT HP3070 platform? 

0 Kudos
9 Respostas
Adolfo_S_Intel
Moderador
5.238 Visualizações

Hello, @WKng 

 

The Intel I210 Frequently Asked Questions, especially questions 2.14 to 2.16 will be useful for your case.

 

Bear in mind that some of those document numbers mentioned might require Intel Developer Zone Premium access to the Intel RDC.

 

Best Regards,

@Adolfo_S_Intel 

WKng
Principiante
5.219 Visualizações

Hi @Adolfo_S_Intel,

 

No, We still no idea how to program MAC address into I210-AT chipset (Flash-less mode) at ICT HP3070 platform.

Please advise the wiring connection and step by step programming and verification steps.

FYI, We not yet install the single board computer onto our custom board during in-circuit test.

 

Regards,

WK NG

Adolfo_S_Intel
Moderador
5.203 Visualizações

Hello @WKng,

 

I send you an e-mail with additional information about this issue.

 

Best Regards,

@Adolfo_S_Intel 

1wersdfs
Principiante
5.037 Visualizações

hi Adolfo,

Can you email me the same instructions that you forwarded.  i would like to change the device id on i210 device on ICT fixture.

thanks

-Josh

CarlosAM_INTEL
Moderador
4.884 Visualizações

Hello,  @1wersdfs :

Thank you for contacting Intel Embedded Community. 

We have sent an email to the address related to this account with information that may help you.

Best regards,

@CarlosAM_INTEL.

mwm
Principiante
4.668 Visualizações

Hi Adolfo,

 

Can you please email me the same instructions that you forwarded. we would like to program i210AT @ ICT fixture.

 

Thanks

Mike

CarlosAM_INTEL
Moderador
4.660 Visualizações

Hello, @mwm:

Thank you for contacting Intel Embedded Community.

You need to update your account to the premier option. You should fill out the form stated on the following website:
https://www.intel.com/content/www/us/en/forms/developer/premier-registration.html 
You should use a business email address to evade any inconvenience. Please avoid the free email provider's address (such as the provided by Hotmail, Gmail, Yahoo, or others).
Best regards,

@CarlosAM_INTEL.

WKng
Principiante
5.142 Visualizações

Hi @Adolfo_S_Intel,

 

Noted and thanks.

 

Regards,

WK NG

WKng
Principiante
4.945 Visualizações

Hi @Adolfo_S_Intel,

 

I couldn't find the product - I210-AT when creating new case.

I only saw FPGA & SSD in All Intel Product.

I tried create my case under Cyclone FPGA but didn't received any reply.

I210-AT not found.JPG

Regards,

WK NG

Responder