eepromARMtool

[MPatt3]

Where do I find the eepromARMtool code? I am working on an ARM based design that uses an i210. I would like to program the NVM via this tool so that I can get the driver to load.

Regards,

Matt

[CarlosAM_INTEL]

Hello LokeshVerma,

Thank you for contacting the Intel Embedded Community.

In order to help you, it is important to let you know that you need an EDC account to have access to this tool. To learn more about the benefits of a EDC Privileged account go to

/www.intel.com/content/www/us/en/embedded/embedded-design-center-support.html http://www.intel.com/content/www/us/en/embedded/embedded-design-center-support.html. Then click on "APPLY NOW" found under the heading, "Apply for extras with privileged access to the Intel EDC¹". After you submit the application, please let us know and we will expedite the review of your application.

Thanks in advance for your cooperation.

Best Regards,

Carlos_A.

[AGuih]

Hi,

I too require the EepromARMTool utility. I have a Privileged EDC account.

Please help.

Thanks and regards,

Arnauld

[CarlosAM_INTEL]

Hello, Arnauld:

Thank you for contacting Intel Embedded Community.

In order to help you, we have contacted you via email.

Best regards,

Carlos_A.

[LHuad]

I'm also looking for eepromARMtool, could you offer eepromARMtool for me, thanks !

My email address : mailto:luhuadong@163.com luhuadong@163.com

[CarlosAM_INTEL]

Hello, luckydarcy:

Thank you for contacting Intel Embedded Community.

It is important to let you know that an EDC account should be required to have access to this tool. To learn more about the benefits of an EDC Privileged account go to http://www.intel.com/content/www/us/en/embedded/embedded-design-center-support.html. Then click on "APPLY NOW" found under the heading, "Apply for extras with privileged access to the Intel EDC¹". After you submit the application, please let us know and we will expedite the review of your application.

We suggest you to use your business email address, to evade any inconvenience. Please avoid the free email provider's address (such the provided by Hotmail, Gmail, yahoo, or others).

We hope that this information is useful to you.

Best regards,

Carlos_A.

[LHuad]

Thanks for reply. I will apply an EDC account.

[yyinx]

Hi CarlosＡ

Could you provide the latest eepromARMTool code，it can support 82583V？and can write the MAC to EEprom?

Thanks.

[CarlosAM_INTEL]

Hello, lyx:

Thank you for contacting Intel Embedded Community.

The Intel(R) 82583V Gigabit Ethernet Controller is unrelated to eepromARMTools.

We hope that this information may answer your questions.

Best regards,

Carlos_A.

[TSmit12]

Carlos_A

Hi there,

I am also looking for the eepromARMtool as we have an I211 connected to an i.MX6.

Are there example NVM images available also?

Many thanks.

Tim

[CarlosAM_INTEL]

Hello, tgs_iplmel :

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

[TSmit12]

Thanks Carlos, I received your email.

[CarlosAM_INTEL]

Hello, tgs_iplmel :

Thanks for your reply.

We are glad to hear that you received our communication.

We hope that the provided information may help you.

Best regards,

Carlos_A.

[AYang18]

Hello, Carlos_A:

I'm also looking for eepromARMtool.

we are using I350-AM4 connect to the ARM platform processor

Can you help us get the tool to programming?

Thank you for your help.

Best Wishes

[CarlosAM_INTEL]

Hello, 456123 :

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

[ldong6]

Hello, Carlos_A:

I'm from china,and looking for eepromARMtool.

My company using I210-IT PCIe interface connect to the IMX6 processor.

Can you help me get the tool to programming?

Thanks.

email: mailto:dongliang@comen.com dongliang@comen.com

[CarlosAM_INTEL]

Hello, dongliang:

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

[VMakh1]

Hi Carlos_A

Can you please send me eepromARMtool?

Thanks!

Best regards,

Vladimir

[CarlosAM_INTEL]

Hello, VMak :

Thank you for contacting Intel Embedded Community.

The eepromARMtool can be sent to you if you have an Embedded Design Center (EDC) Privileged account. In order to request an upgrade from your Basic EDC account to Privileged, go to the following website:

https://www.intel.com/content/www/us/en/forms/design/contact-support.html

We hope that this information may help you to solve this situation.

Best regards,

Carlos_A.

[VMakh1]

Hi Carlos!

I've upgraded my account to privileged and received approval. Can you please send me the tool and source code?

Thanks!

Best regards,

Vladimir

[CarlosAM_INTEL]

Hello, VMak :

Thanks for your update.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

[DKlet]

Hi Carlos_A,

We have an i210 design, can you also send me the latest version of the eepromARMtool? I do have a Privileged Account already.

Thank you!

Dan