unprogrammed/blank Intel I211AT

[RPogl]

Hì

I'm designed a CONGATEC MA5 module carrier board that has an unprogrammed/blank Intel I211AT on PCIe Lane 0.

How can i program the iNVM internal device in order to get the WIN10 Device Manager to recognize the device?

Thanks

Riccardo

[CarlosAM_INTEL]

Hello, @RPogl​:

Thank you for contacting Intel Embedded Community.

We would like to answer your question related to third-party devices, however the information related to them is unavailable to us.

Due to this fact, you should address your questions related to this or any device manufacturer by this company as a reference by filling out the form stated in the following website:

https://www.congatec.com/us/contact.html

Best regards,

@Mæcenas_INTEL​.

[RPogl]

Hello @Maecenas_INTEL

maybe I didn't explain the problem correctly

The I211 component is mounted on the carrier boad designed by me and not on a CONGATEC carrier board.

MA5 have his Ethernet controller on board and work properly but i added a second ethernet controller on my carrier board.

I have to program this ethernet controller i211 AT mounted on my carrier board.

Best regards,

@RPogl (Cliente)​

[CarlosAM_INTEL]

Hello, @RPogl​:

Thanks for your clarification.

Could you please clarify if the affected design has been review by Intel? By the way, please let us know the sources that you have used to design it.

We are waiting for your clarification.

Best regards,

@Mæcenas_INTEL​.