ISP Firmware for Intel ATOM E3826

[LShar2]

Hello,

I am using MIPI CSI interface of Intel ATOM E3826 and want to receive a video data from CSI TX connected to the primary port port of the interface. Tn the https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/atom-e3800-mipi-csi2-camera-sub-system-paper.pdf Intel(R) Atom(TM) Processor E3800 Series: MIPI* CSI-2* Camera Sub System document there is mention of ISP Firmware that has to be loaded to ISP memory for some properties (like scaling and auto focus etc.). what if I skip loading ISP firmware and directly configure MIPI Ports and get the frame. I just want video frames and use them as it is.

As features provided by ISP firmware is of no use to me can I skip loading ISP to memory or will it effect receiver properties of the interface.

[Adolfo_S_Intel]

Hello, Lalit_LFT

I am investigating your question and we will provide more information as soon as possible.

Best Regards,

Adolfo Sanchez

[CarlosAM_INTEL]

Hello, Lalit_LFT:

Thank you for contacting Intel Embedded Community.

We suggest you use the information stated on page 18 of the https://cdrdv2.intel.com/v1/dl/getContent/550831 Intel Atom E3800 Product Family ISP Technical Training Material Presentation document # 550831.

This document is accessible when you are logged into your Resource & Design Center (RDC) privileged account. It can be requested by filling out the https://www.intel.com/content/www/us/en/forms/design/contact-support.html RDC Account Support form.

We hope that this information may help you.

Best regards,

Carlos_A.