Hi all,
I bringup broadwell-de platform on Intel CRB CamelBack Mountain REV02,
BIOS use Coreboot +Intel Broadwell-de FSP,have some issue and question,
please have some body kindly help, thanks.
1. Its can not to boot, BIOS hang on post code (7A), the log/ .config see attach file.
* Boot State Machine: bs_payload_load()
POST_BS_PAYLOAD_LOAD 0x7a
2. Why on Coreboot project CamelBackMountain_fsp, BIOS no to initIal GPIO?
If I need modify GPIO status, how to do?
Best Regards
-James
Link Copied
Hello James_Lee,
Thank you for contacting the Intel Embedded Community.
We suggest you as reference review the suggestions stated at the https://www.coreboot.org/pipermail/coreboot-gerrit/2013-November/004454.html [coreboot-gerrit] New patch to review for coreboot: a43dfa7 Clean up POST codes for Boot State machine .
We hope that this information may help you.
Best Regards,
Carlos_A.
Hello Carlos_A
Thank you.
OK, I will spay some time to study the mail points description,
Thank you.
Best Regards.
James
For more complete information about compiler optimizations, see our Optimization Notice.