Embedded Intel® Core™ Processors
Communicate Intel® Core™ Hardware, Software, Firmware, Graphics Concerns

MAC address apply

SHan9
Beginner
2,047 Views

Hello,

We're using a i211 ethernet controller with an iMX6 CPU (ARM).We want to apply for some MAC address with you.Can you provide it?

Thank you.

0 Kudos
4 Replies
CarlosAM_INTEL
Moderator
1,069 Views

Hello, hss:

Thank you for contacting Intel Embedded Community.

In order to be on the same page, could you please clarify if the affected design has been developed by you or a third-party company? In case that it is a third-party device, could you please let us know all the information related to it?

Waiting for reply for the information that should answer these questions.

Best regards,

Carlos_A.

0 Kudos
SHan9
Beginner
1,069 Views

Hello,Carlos A!

Thank you for your apply. The affected design has been developed by our company.I use I211-AT for internet development,but I don't have valid MAC address。I don't know who to apply for a MAC address, Intel or other organization?In case for Intel ,how can I apply?

0 Kudos
CarlosAM_INTEL
Moderator
1,069 Views

Hello, hss:

Thanks for your reply.

We suggest you as a reference to review the information stated at the following website:

https://www.pcworld.com/article/240803/how_to_find_your_ip_address_and_mac_address.html https://www.pcworld.com/article/240803/how_to_find_your_ip_address_and_mac_address.html

By the way, in case that you want to write the Intel(R) Ethernet Controller I211-AT MAC address please use the Intel(R) LANConf Software Tool, which is included in the https://cdrdv2.intel.com/v1/dl/getContent/348742 Intel(R) Network Connections Tools 23.4 PV LAN Software Tools document # 348742.

It is accessible when you are logged into your Resource and Design Center (RDC) privileged account.

This account can be requested by filling out the https://www.intel.com/content/www/us/en/forms/design/contact-support.html RDC Account Support form.

We hope that this information may help you.

Best regards,

Carlos_A.

0 Kudos
MJeff
New Contributor I
1,069 Views

Hello hss

You need to apply to the IEEE.

https://standards.ieee.org/faqs/regauth.html# 2 IEEE-SA - IEEE Registration Authority

You fill in the form and pay for the MAC addresses you need and they will send you a block of addresses.

0 Kudos
Reply